Connect to the Device with: gatttool -I <Mac Address>
Then you get 6 Byte:
For reading you have to split in to 2 Byte of the Input. The first 2 Byte present the scale, measure, decimal Point Position.
Number | Value of scale |
---|---|
1 | n (nano) |
2 | u (micro) |
3 | m (milli ) |
5 | k (kilo) |
6 | M (mega) |
Number | Value of measure |
---|---|
1 | Vdc |
2 | Vac |
3 | Adc |
4 | Ohms |
5 | F |
6 | Hz |
7 | %% |
8 | °C |
9 | °F |
10 | V |
11 | Ohms |
12 | hFE |
The second two bytes represent the function.
Number | Value of function |
---|---|
1 | Hold |
2 | Δ |
4 | Auto |
8 | Low Battery |
16 | min |
32 | max |
The last two bytes represent the value that can be seen on the multimeter.