-
Notifications
You must be signed in to change notification settings - Fork 101
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
A worked example of .nox Metrohm file reading and pre-processing #282
Comments
Getting this error: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xff in position 5: invalid start byte When I try to open an EIS .nox file. |
Hi @AlexanderWilson1993, do you have an example file you can share? It seems like the file is not utf-8 encoded so the code will need to read in the file as bytes (and then decoded them according to the proper format which we might have to guess). Unfortunately, it seems like a lot of the instrument manufacturers do this to make it difficult for you to use anything but their own proprietary software for analysis :( |
Hi there,
I have been looking through the documentation and have been unable to find an actual example where the file is coming from a .nox Metrohm file type. I have tried to write the code on my own and have had no luck. If you could add a worked example that would be great!
This would be helpful for other users with different file types other than .csv.
Best wishes,
Alex
The text was updated successfully, but these errors were encountered: