You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Press and hold key mapped to an input mode while booting resulting in booting into that input mode.
Current Behavior
Press and hold key mapped to an input mode while booting does not result in booting into that input mode. Instead it remains in whatever input mode it was in or saved through web config.
Because Keyboard Host add-on does not work at all with 0.7.8, this was done with 0.7.7 and I was unable to confirm whether the issue persists with 0.7.8 firmware
Flash GP2040-CE converter that has a USB Host port with firmware
Connect keyboard
Press and hold an input mode button
Plug in or reset the converter
Input mode remains unchanged
The text was updated successfully, but these errors were encountered:
Expected Behavior
Press and hold key mapped to an input mode while booting resulting in booting into that input mode.
Current Behavior
Press and hold key mapped to an input mode while booting does not result in booting into that input mode. Instead it remains in whatever input mode it was in or saved through web config.
Context
Firmware Version: 0.7.7
Board Config Name: GP2040-CE_0.7.7_KeyboardConverter.uf2
Device Name: Keyboard Converter
Purchase Link: https://github.com/OpenStickCommunity/Hardware/tree/main/Boards/Supported%20Boards/GP2040%20Keyboard%20Converter/Waveshare%20Zero-PCB
Steps to Reproduce
Because Keyboard Host add-on does not work at all with 0.7.8, this was done with 0.7.7 and I was unable to confirm whether the issue persists with 0.7.8 firmware
The text was updated successfully, but these errors were encountered: