Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Using Advanced Stateful Mode with TRex on Two Physical Machines with Mellanox-6x DX Cards #1129

Open
Lidhoria opened this issue Apr 30, 2024 · 0 comments

Comments

@Lidhoria
Copy link

hi,

1.Is it Possible to in Trex-core using Mellonax card
to Configure Machine A to Generate Traffic from Both Ports and Act as a Client, While Machine B Receives Traffic from Both Ports and Acts as a Server, in a Point-to-Point Connection Setup Using Mellanox-6x DX Cards Connected via 100G SFP Cable?
2. the interfaces of port 0 ca:00.0 is connected to interfaces of port 1 ca:00.1 of machine B and in the same way port 1 ca:00.1 of machine A is connected to port 0 ca:00.0 of machine B here.
3.here when i am running this command on machine A ./t-rex-64 --cfg /etc/trex_cfg.yaml -f astf/udp2.py -m 10 -d 1000 -c 1 -v 7 --astf , then here only one port (port 0)is generating the packet here , & when i am running this command on both machine A and B .
Screenshot from 2024-04-30 15-57-20

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant