Skip to content

Latest commit

 

History

History
51 lines (42 loc) · 2.3 KB

convention.md

File metadata and controls

51 lines (42 loc) · 2.3 KB

Project Convention

Naming

Buses

  • "bus_name" --- bus name in form "bus_"
  • "region" --- name of region where the bus is located
  • "in_service" --- if the bus is in service (not in maintenance)
  • "v_rated_kv" --- rated voltage of the bus in kilovolts
  • "x_coordinate" --- x-coordinate of the bus
  • "y_coordinate" --- y-coordinate of the bus
  • "is_slack" --- whether the bus is a slack bus
  • "max_v_pu" --- rated max limit of bus voltage in per units
  • "min_v_pu" --- rated min limit of bus voltage in per units

Branches

  • "branch_name" --- branch name in form "branch_<from_bus number><to_bus number>"
  • "from_bus" --- name of the bus where the branch starts
  • "to_bus" --- name of the bus where the branch ends
  • "parallel" --- number of the branch in parallel branches
  • "in_service" --- if the branch is in service (not in maintenance)
  • "r_ohm" --- branch resistance in ohms
  • "x_ohm" --- branch reactance in ohms
  • "b_µs" --- branch reactive conductance in microsiemens
  • "trafo_ratio_rel" --- transformation ratio (relative to the ratio of voltage levels of the high and low sides) if the branch is a transformer
  • "max_i_ka" --- maximum current over the branch in kiloamperes

Loads

  • "load_name" --- load name in form "load_"
  • "bus_name" --- name of the bus where the load is placed
  • "in_service" --- if the load is in service
  • "p_mw" --- actual active demand of the load in megawatts
  • "q_mvar" --- actual reactive demand of the load in megavolt-amperes
  • "datetime" --- date and time of variable measurement

Generators

  • "gen_name" --- generator name in form "<gen_type>_"
  • "bus_name" --- name of the bus where the generator is placed
  • "in_service" --- if the generator is in service (not in maintenance)
  • "is_optimized" --- whether the output of this generator is optimized at the OPF stage
  • "max_p_mw" --- rated max active output in megawatts
  • "min_p_mw" --- rated min active output in megawatts
  • "p_mw" --- actual active output of the generator in megawatts
  • "max_q_mvar" --- actual max limit of reactive output in megavolt-amperes according to PQ-diagram
  • "min_q_mvar" --- actual min limit of reactive output in megavolt-amperes according to PQ-diagram
  • "datetime" --- date and time of variable measurement
  • "opt_category" --- category used for the OPF estimation