virtcontainers

Table of Contents

• What is it?
• Background
• Out of scope
  • virtcontainers and Kubernetes CRI
• Design
  • Sandboxes
  • Hypervisors
  • Agents
  • Shim
  • Proxy
• API
  • Sandbox API
  • Container API
• Networking
  • CNM
• Storage
  • How to check if container uses devicemapper block device as its rootfs
• Devices
  • How to pass a device using VFIO-passthrough
• Developers
• Persistent storage plugin support
• Experimental features

What is it?

virtcontainers is a Go library that can be used to build hardware-virtualized container runtimes.

Background

The few existing VM-based container runtimes (Clear Containers, runV, rkt's KVM stage 1) all share the same hardware virtualization semantics but use different code bases to implement them. virtcontainers's goal is to factorize this code into a common Go library.

Ideally, VM-based container runtime implementations would become translation layers from the runtime specification they implement (e.g. the OCI runtime-spec or the Kubernetes CRI) to the virtcontainers API.

virtcontainers was used as a foundational package for the Clear Containers runtime implementation.

Out of scope

Implementing a container runtime is out of scope for this project. Any tools or executables in this repository are only provided for demonstration or testing purposes.

virtcontainers and Kubernetes CRI

virtcontainers's API is loosely inspired by the Kubernetes CRI because we believe it provides the right level of abstractions for containerized sandboxes. However, despite the API similarities between the two projects, the goal of virtcontainers is not to build a CRI implementation, but instead to provide a generic, runtime-specification agnostic, hardware-virtualized containers library that other projects could leverage to implement CRI themselves.

Design

Sandboxes

The virtcontainers execution unit is a sandbox, i.e. virtcontainers users start sandboxes where containers will be running.

virtcontainers creates a sandbox by starting a virtual machine and setting the sandbox up within that environment. Starting a sandbox means launching all containers with the VM sandbox runtime environment.

Hypervisors

The virtcontainers package relies on hypervisors to start and stop virtual machine where sandboxes will be running. An hypervisor is defined by an Hypervisor interface implementation, and the default implementation is the QEMU one.

Update cloud-hypervisor client code

See docs

Agents

During the lifecycle of a container, the runtime running on the host needs to interact with the virtual machine guest OS in order to start new commands to be executed as part of a given container workload, set new networking routes or interfaces, fetch a container standard or error output, and so on. There are many existing and potential solutions to resolve that problem and virtcontainers abstracts this through the Agent interface.

Shim

In some cases the runtime will need a translation shim between the higher level container stack (e.g. Docker) and the virtual machine holding the container workload. This is needed for container stacks that make strong assumptions on the nature of the container they're monitoring. In cases where they assume containers are simply regular host processes, a shim layer is needed to translate host specific semantics into e.g. agent controlled virtual machine ones.

Proxy

When hardware virtualized containers have limited I/O multiplexing capabilities, runtimes may decide to rely on an external host proxy to support cases where several runtime instances are talking to the same container.

API

The high level virtcontainers API is the following one:

Sandbox API

• CreateSandbox(sandboxConfig SandboxConfig) creates a Sandbox. The virtual machine is started and the Sandbox is prepared.

• DeleteSandbox(sandboxID string) deletes a Sandbox. The virtual machine is shut down and all information related to the Sandbox are removed. The function will fail if the Sandbox is running. In that case StopSandbox() has to be called first.

• StartSandbox(sandboxID string) starts an already created Sandbox. The Sandbox and all its containers are started.

• RunSandbox(sandboxConfig SandboxConfig) creates and starts a Sandbox. This performs CreateSandbox() + StartSandbox().

• StopSandbox(sandboxID string) stops an already running Sandbox. The Sandbox and all its containers are stopped.

• PauseSandbox(sandboxID string) pauses an existing Sandbox.

• ResumeSandbox(sandboxID string) resume a paused Sandbox.

• StatusSandbox(sandboxID string) returns a detailed Sandbox status.

• ListSandbox() lists all Sandboxes on the host. It returns a detailed status for every Sandbox.

Container API

• CreateContainer(sandboxID string, containerConfig ContainerConfig) creates a Container on an existing Sandbox.

• DeleteContainer(sandboxID, containerID string) deletes a Container from a Sandbox. If the Container is running it has to be stopped first.

• StartContainer(sandboxID, containerID string) starts an already created Container. The Sandbox has to be running.

• StopContainer(sandboxID, containerID string) stops an already running Container.

• EnterContainer(sandboxID, containerID string, cmd Cmd) enters an already running Container and runs a given command.

• StatusContainer(sandboxID, containerID string) returns a detailed Container status.

• KillContainer(sandboxID, containerID string, signal syscall.Signal, all bool) sends a signal to all or one container inside a Sandbox.

An example tool using the virtcontainers API is provided in the hack/virtc package.

For further details, see the API documentation.

Networking

virtcontainers supports the 2 major container networking models: the Container Network Model (CNM) and the Container Network Interface (CNI).

Typically the former is the Docker default networking model while the later is used on Kubernetes deployments.

CNM

CNM lifecycle

1. RequestPool

2. CreateNetwork

3. RequestAddress

4. CreateEndPoint

5. CreateContainer

6. Create config.json

7. Create PID and network namespace

8. ProcessExternalKey

9. JoinEndPoint

10. LaunchContainer

11. Launch

12. Run container

Runtime network setup with CNM

1. Read config.json

2. Create the network namespace (code)

3. Call the prestart hook (from inside the netns) (code)

4. Scan network interfaces inside netns and get the name of the interface created by prestart hook (code)

5. Create bridge, TAP, and link all together with network interface previously created (code)

6. Start VM inside the netns and start the container (code)

Drawbacks of CNM

There are three drawbacks about using CNM instead of CNI:

• The way we call into it is not very explicit: Have to re-exec dockerd binary so that it can accept parameters and execute the prestart hook related to network setup.
• Implicit way to designate the network namespace: Instead of explicitly giving the netns to dockerd, we give it the PID of our runtime so that it can find the netns from this PID. This means we have to make sure being in the right netns while calling the hook, otherwise the VETH pair will be created with the wrong netns.
• No results are back from the hook: We have to scan the network interfaces to discover which one has been created inside the netns. This introduces more latency in the code because it forces us to scan the network in the CreateSandbox path, which is critical for starting the VM as quick as possible.

Storage

Container workloads are shared with the virtualized environment through 9pfs. The devicemapper storage driver is a special case. The driver uses dedicated block devices rather than formatted filesystems, and operates at the block level rather than the file level. This knowledge has been used to directly use the underlying block device instead of the overlay file system for the container root file system. The block device maps to the top read-write layer for the overlay. This approach gives much better I/O performance compared to using 9pfs to share the container file system.

The approach above does introduce a limitation in terms of dynamic file copy in/out of the container via docker cp operations. The copy operation from host to container accesses the mounted file system on the host side. This is not expected to work and may lead to inconsistencies as the block device will be simultaneously written to, from two different mounts. The copy operation from container to host will work, provided the user calls sync(1) from within the container prior to the copy to make sure any outstanding cached data is written to the block device.

docker cp [OPTIONS] CONTAINER:SRC_PATH HOST:DEST_PATH
docker cp [OPTIONS] HOST:SRC_PATH CONTAINER:DEST_PATH

Ability to hotplug block devices has been added, which makes it possible to use block devices for containers started after the VM has been launched.

How to check if container uses devicemapper block device as its rootfs

Start a container. Call mount(8) within the container. You should see / mounted on /dev/vda device.

Devices

Support has been added to pass VFIO assigned devices on the docker command line with --device. Support for passing other devices including block devices with --device has not been added added yet.

How to pass a device using VFIO-passthrough

1. Requirements

IOMMU group represents the smallest set of devices for which the IOMMU has visibility and which is isolated from other groups. VFIO uses this information to enforce safe ownership of devices for userspace.

You will need Intel VT-d capable hardware. Check if IOMMU is enabled in your host kernel by verifying CONFIG_VFIO_NOIOMMU is not in the kernel configuration. If it is set, you will need to rebuild your kernel.

The following kernel configuration options need to be enabled:

CONFIG_VFIO_IOMMU_TYPE1=m 
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m

In addition, you need to pass intel_iommu=on on the kernel command line.

2. Identify BDF(Bus-Device-Function) of the PCI device to be assigned.

$ lspci -D | grep -e Ethernet -e Network
0000:01:00.0 Ethernet controller: Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 (rev 01)

$ BDF=0000:01:00.0

3. Find vendor and device id.

$ lspci -n -s $BDF
01:00.0 0200: 8086:1528 (rev 01)

4. Find IOMMU group.

$ readlink /sys/bus/pci/devices/$BDF/iommu_group
../../../../kernel/iommu_groups/16

5. Unbind the device from host driver.

$ echo $BDF | sudo tee /sys/bus/pci/devices/$BDF/driver/unbind

6. Bind the device to vfio-pci.

$ sudo modprobe vfio-pci
$ echo 8086 1528 | sudo tee /sys/bus/pci/drivers/vfio-pci/new_id
$ echo $BDF | sudo tee --append /sys/bus/pci/drivers/vfio-pci/bind

7. Check /dev/vfio

$ ls /dev/vfio
16 vfio

8. Start a Clear Containers container passing the VFIO group on the docker command line.

docker run -it --device=/dev/vfio/16 centos/tools bash

9. Running lspci within the container should show the device among the PCI devices. The driver for the device needs to be present within the Clear Containers kernel. If the driver is missing, you can add it to your custom container kernel using the osbuilder tooling.

Developers

For information on how to build, develop and test virtcontainers, see the developer documentation.

Persistent storage plugin support

See the persistent storage plugin documentation.

Experimental features

See the experimental features documentation.