ionscript

#!/bin/bash
#
# ionscript
# David Young
# Sep 20, 2008
#
# The program will manage the various configuration files needed to start an
# ion node.  It will take several specified rc files (man ionrc ionsecrc ltprc
# bprc cfdprc ipnrc dtn2rc dtpcrc acsrc imcrc bssrc) and put them into a single
# large configuration file with the appropriate section markers as needed by
# ionstart.sh.
# The program can also perform the opposite function: take a single large
# formatted configuration file, as would be used by ionstart.sh, and split it
# into individual components.
# The program supports the optional TAG for storing more than one configuration
# into the same file (only in the larger file) and also supports appending to
# the larger file, to fully utilize this feature.
# The program also tries it's best to clean out the marker lines when splitting
# a large configuration into a smaller one. NOTE: this will remove any lines
# from the configuration which start with '##'

ION_OPEN_SOURCE=1

# the location of the awkscript.
# defining the environment variable AWKSCRIPT before running this script
# will work (for things like make test) before installation
if [[ ! -r "${AWKSCRIPT}" ]] ; then
	SUBFOLDER=`dirname "${0}"`
	# assuming this bash script is installed with the usual binaries from autoconf
	AWKSCRIPT="${SUBFOLDER}/../share/ion/ionstart.awk"
	if [[ ! -r "${AWKSCRIPT}" ]] ; then
		echo
		echo "Didn't find awk script in ${AWKSCRIPT} now searching locally..."
		# assume the bash script is in the same location as the awk script
		AWKSCRIPT="${SUBFOLDER}/ionstart.awk"
		if [[ ! -r "${AWKSCRIPT}" ]] ; then
			echo
			echo "Cannot find the location of the awk script."
			echo "I thought it would be ${AWKSCRIPT} , but nothing is there."
			echo "Set the environment variable AWKSCRIPT or edit me in ${0}"
			exit 1
		fi
	fi
fi

function USAGE {
	echo
	echo    "IONSCRIPT: Interplanetary Overlay Network configuration creation script."
	echo    "USAGE:"
	echo    "	ionscript <-I input | -O output> [-A] [-t tag] [-a acsrc] [-b bprc]"
	echo    "            [-B bssrc]  [-d dtn2rc]   [-D dtpcrc] [-i ionrc] [-l ltprc] [-m imcrc]"
	echo -n "            [-p ipnrc]  [-s ionsecrc]"
if [ "$ION_OPEN_SOURCE" == "1" ]; then
	echo " [-c cfdprc]"
else
	echo ""
fi
	echo
	echo "	-I input	Specifies file containing the configuration for each"
	echo "			ion administration program. Each section must be"
	echo "			preceded by: ## begin programname tag"
	echo "			and proceeded by: ## end programname tag"
	echo "			If this INPUT option is defined, then the files"
	echo "			defined in -a -b -B -c -d -i -l -m -p -s will be OUTPUT"
	echo "			with the appropriate configuration section."
	echo
	echo "	-O output	Specifies file to contain the configuration for each"
	echo "			ion administration program. Each section will be"
	echo "			preceded by: ## begin programname tag"
	echo "			and proceeded by: ## end programname tag"
	echo "			If this OUTPUT option is defined, then the files"
	echo "			defined in -a -b -B -c -d -i -l -m -p -s will be used"
	echo "			to add an appropriate configuration section to output."
	echo
	echo "	-t tag		Optional tag, used to specify which sections are used"
	echo "			in config file.  If unspecified, sections with no tag"
	echo "			are used."
	echo
	echo "	-A		Specifies if the output files are to be appended to"
	echo "			instead of overwritten."
	echo
	echo "	-a acsrc	Specifies file acsrc to be used with acsadmin."
	echo "			Default filename is input|output.tag.acsrc."
	echo "	-b bprc		Specifies file bprc to be used with bpadmin."
	echo "			Default filename is input|output.tag.bprc."
	echo "	-B bssrc	Specifies file bssrc to be used with bssadmin."
	echo "			Default filename is input|output.tag.bssrc."
	echo "	-d dtn2rc	Specifies file dtn2rc to be used with dtn2admin."
	echo "			Default filename is input|output.tag.dtn2rc."
	echo "	-D dtpcrc	Specifies file dtpcrc to be used with dtpcadmin."
	echo "			Default filename is input|output.tag.dtpcrc."
	echo "	-i ionrc	Specifies file ionrc to be used with ionadmin."
	echo "			Default filename is input|output.tag.ionrc."
	echo "	-l ltprc	Specifies file ltprc to be used with ltpadmin."
	echo "			Default filename is input|output.tag.ltprc."
	echo "	-m imcrc	Specifies file imcrc to be used with imcadmin."
	echo "			Default filename is input|output.tag.imcrc."
	echo "	-p ipnrc	Specifies file ipnrc to be used with ipnadmin."
	echo "			Default filename is input|output.tag.ipnrc."
	echo "	-s ionsecrc	Specifies file ionsecrc to be used with ionsecadmin."
	echo "			Default filename is input|output.tag.ionsecrc."
if [ "$ION_OPEN_SOURCE" == "1" ]; then
	echo "	-c cfdprc	Specifies file cfdprc to be used with cfdpadmin."
	echo "			Default filename is input|output.tag.cfdprc."
fi
}

# check for all the options
while getopts ":i:d:D:c:p:b:l:I:O:t:s:a:m:B:hA" options; do
	case $options in
		I ) INPUTFILE="${OPTARG}"
			DEFAULTBASEFILE="${OPTARG}"
			if [[ ! -r "${OPTARG}" ]] ; then
				echo
				echo "The inputfile ${OPTARG} can't be read."
				failure="TRUE"
			fi
			if [[ -n "${OUTPUTFILE}" ]] ; then
				echo
				echo "You cannot define both -I input and -O output."
				USAGE
				exit 1
			fi;;
		O ) OUTPUTFILE="${OPTARG}"
			DEFAULTBASEFILE="${OPTARG}"
			if [[ -n "${INPUTFILE}" ]] ; then
				echo
				echo "You cannot define both -I input and -O output."
				USAGE
				exit 1
			fi;;
		t ) TAG="${OPTARG}";;
#ignore the individual file options, because you don't know what they should be.
		A ) ;;
		a ) ;;
		B ) ;;
		b ) ;;
		c ) ;;
		d ) ;;
		D ) ;;
		i ) ;;
		l ) ;;
		m ) ;;
		p ) ;;
		s ) ;;
		h ) USAGE
			exit 1;;
		\? ) USAGE
			exit 1;;
		* ) USAGE
			exit 1;;
	esac
done

if [[ -z "${INPUTFILE}" && -z "${OUTPUTFILE}" ]] ; then
	echo
	echo "You must define either -I input or -O output."
	USAGE
	exit 1
fi

# now the script is either going to fill an -O OUTPUT file with the contents of
# -a -b -B -c -d -D -i -l -m -p -s OR the script will use the -I INPUT file and
# split into component parts to be put into -a -b -B -c -d -D -i -l -m -p -s

# fill in the default base filenames
# note that BSSRC and IPNRC are initialized to empty here so that we can detect
# if the user specifies both, which is not valid as these modules are mutually
# exclusive.
if [[ -n "${TAG}" ]] ; then
	DEFAULTBASEFILE="${DEFAULTBASEFILE}.${TAG}"
fi
ACSRC="${DEFAULTBASEFILE}.acsrc"
BPRC="${DEFAULTBASEFILE}.bprc"
DTN2RC="${DEFAULTBASEFILE}.dtn2rc"
DTPCRC="${DEFAULTBASEFILE}.dtpcrc"
IONRC="${DEFAULTBASEFILE}.ionrc"
LTPRC="${DEFAULTBASEFILE}.ltprc"
IMCRC="${DEFAULTBASEFILE}.imcrc"
IONSECRC="${DEFAULTBASEFILE}.ionsecrc"
CFDPRC="${DEFAULTBASEFILE}.cfdprc"
# these variables are initialized later
BSSRC=""
IPNRC=""

# reset options index to reuse getopts
OPTIND=1
options=""
while getopts ":i:d:D:c:p:b:l:I:O:t:s:a:m:B:hA" options; do
	case $options in
		i ) IONRC="${OPTARG}";;
		d ) DTN2RC="${OPTARG}";;
		D ) DTPCRC="${OPTARG}";;
		p ) IPNRC="${OPTARG}";;
		a ) ACSRC="${OPTARG}";;
		b ) BPRC="${OPTARG}";;
		B ) BSSRC="${OPTARG}";;
		c ) CFDPRC="${OPTARG}"
		    if [ "$ION_OPEN_SOURCE" == "0" ]; then
			echo "CFDP not available"
			exit
		    fi;;
		l ) LTPRC="${OPTARG}";;
		m ) IMCRC="${OPTARG}";;
		s ) IONSECRC="${OPTARG}";;
		A ) append="TRUE";;
# the input, output, tag options have already been used, ignore them
		I ) ;;
		O ) ;;
		t ) ;;
		h ) USAGE
			exit 1;;
		\? ) USAGE
			exit 1;;
		* ) USAGE
			exit 1;;
	esac
done

# Detect if both IPN and BSS filenames are specified and reject this case, as
# IPN and BSS are mutually exclusive modules.
if [[ ! -z "${BSSRC}" ]] && [[ ! -z "${IPNRC}" ]] ; then
	echo "Error: bss and ipn are mutually exclusive!"
	exit 1
fi

# Fill in the default base filenames here if necessary instead of above so we have a
# way to detect if both were specified by the user, which is not allowed.
if [[ -z "${BSSRC}" ]]  ; then
	BSSRC="${DEFAULTBASEFILE}.bssrc"
fi
if [[ -z "${IPNRC}" ]]  ; then
	IPNRC="${DEFAULTBASEFILE}.ipnrc"
fi

# if there is an input file, we will convert INPUTFILE -> ionrc, dtn2rc, ipnrc, etc
if [[ -n "${INPUTFILE}" ]] ; then
	echo
	echo "I will now split the large input configuration file into its component parts."
	echo
	awk -f "${AWKSCRIPT}" -v configfile="${INPUTFILE}" -v tag="${TAG}" -v echo="cat" -v append="${append}" -v ionrc="${IONRC}" -v ltprc="${LTPRC}" -v bprc="${BPRC}" -v cfdprc="${CFDPRC}" -v ipnrc="${IPNRC}" -v dtn2rc="${DTN2RC}" -v dtpcrc="${DTPCRC}" -v ionsecrc="${IONSECRC}" -v acsrc="${ACSRC}" -v bssrc="${BSSRC}" -v imcrc="${IMCRC}" "${INPUTFILE}"
else
# there is an OUTPUTFILE, which will contain the contents of ionrc, dtn2rc, ipnrc etc.
	datenow=`date`
	if [[ "${append}" == "TRUE" ]] ; then
		echo
		echo "I will now append the individual configuration files into one large file."
		echo "## File modified by ${0}" >>"${OUTPUTFILE}"
		echo "## ${datenow}" >>"${OUTPUTFILE}"
		echo "## Run the following command to start ION node:" >>"${OUTPUTFILE}"
		echo "##	% ionstart -I \"${OUTPUTFILE}\"" >>"${OUTPUTFILE}"
		
	else
		echo
		echo "I will now create a new configuration file."
		echo "## File created by ${0}" >"${OUTPUTFILE}"
		echo "## ${datenow}" >>"${OUTPUTFILE}"
		echo "## Run the following command to start ION node:" >>"${OUTPUTFILE}"
		echo "##	% ionstart -I \"${OUTPUTFILE}\"" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${IONRC}" ]] ; then
		echo
		echo "Appending ${IONRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin ionadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${IONRC}" >>"${OUTPUTFILE}"
		echo "## end ionadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${IONSECRC}" ]] ; then
		echo
		echo "Appending ${IONSECRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin ionsecadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${IONSECRC}" >>"${OUTPUTFILE}"
		echo "## end ionsecadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${LTPRC}" ]] ; then
		echo
		echo "Appending ${LTPRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin ltpadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${LTPRC}" >>"${OUTPUTFILE}"
		echo "## end ltpadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${BPRC}" ]] ; then
		echo
		echo "Appending ${BPRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin bpadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${BPRC}" >>"${OUTPUTFILE}"
		echo "## end bpadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${CFDPRC}" ]]  && [ "$ION_OPEN_SOURCE" == "1" ]; then
		echo
		echo "Appending ${CFDPRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin cfdpadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${CFDPRC}" >>"${OUTPUTFILE}"
		echo "## end cfdpadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${IPNRC}" ]] ; then
		echo
		echo "Appending ${IPNRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin ipnadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${IPNRC}" >>"${OUTPUTFILE}"
		echo "## end ipnadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${DTN2RC}" ]] ; then
		echo
		echo "Appending ${DTN2RC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin dtn2admin ${TAG}" >>"${OUTPUTFILE}"
		cat "${DTN2RC}" >>"${OUTPUTFILE}"
		echo "## end dtn2admin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${DTPCRC}" ]] ; then
		echo
		echo "Appending ${DTPCRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin dtpcadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${DTPCRC}" >>"${OUTPUTFILE}"
		echo "## end dtpcadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${ACSRC}" ]] ; then
		echo
		echo "Appending ${ACSRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin acsadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${ACSRC}" >>"${OUTPUTFILE}"
		echo "## end acsadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${BSSRC}" ]] ; then
		echo
		echo "Appending ${BSSRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin bssadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${BSSRC}" >>"${OUTPUTFILE}"
		echo "## end bssadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
	if [[ -r "${IMCRC}" ]] ; then
		echo
		echo "Appending ${IMCRC} into ${OUTPUTFILE}."
		echo >>"${OUTPUTFILE}"
		echo "## begin imcadmin ${TAG}" >>"${OUTPUTFILE}"
		cat "${IMCRC}" >>"${OUTPUTFILE}"
		echo "## end imcadmin ${TAG}" >>"${OUTPUTFILE}"
	fi
fi

echo
echo "ION configuration creation script completed."