You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
3D printer brand / version + firmware version (if known)
Prusa MK3S
Firmware: 3.9.3
Behavior
if you set a Brim value to enhance the adhesion of a print to the print bed, it does not help in standard settings, because the default "elephant foot compensation" shrinks down the first layer: now there is a gap between the brim and the outer perimeter of the print object.
Solution: --> if brim is activated, the Slicer should give a feedback that elephant foot compensation needs to be set to zero in order for brim to work as expected.
The text was updated successfully, but these errors were encountered:
Version
2.3.0+win64
Operating system type + version
win10
3D printer brand / version + firmware version (if known)
Prusa MK3S
Firmware: 3.9.3
Behavior
if you set a Brim value to enhance the adhesion of a print to the print bed, it does not help in standard settings, because the default "elephant foot compensation" shrinks down the first layer: now there is a gap between the brim and the outer perimeter of the print object.
Solution: --> if brim is activated, the Slicer should give a feedback that elephant foot compensation needs to be set to zero in order for brim to work as expected.
The text was updated successfully, but these errors were encountered: