Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

When using elephant foot comp any brim set is not attached to the object. #6795

Closed
Taerog opened this issue Aug 12, 2021 · 1 comment
Closed

Comments

@Taerog
Copy link

Taerog commented Aug 12, 2021

Version

PrusaSlicer
Version: 2.3.3+win64
Build: PrusaSlicer-2.3.3+win64-202107161027

Operating System: Windows
System Architecture: 64 bit
Windows Version: Windows 10 (build 19044), 64-bit edition
Total RAM size [MB]: 68,658MB

3D printer brand / version + firmware version (if known)

Modified project red Railcore

Behavior

When using elephant foot comp and brim, The brim is not attached to the object defeating its use.
ie the elephant foot comp makes gap from the brim making the brim useless.

Printed a tall tower and it failed because the brim was not used.

Workaround turn off elephant foot comp. But this issue is not readily apparent and operates differently on other slicers.

Recommendation
Either adjust elephant foot comp to work with brim. (preferable) Y(es this may seem to defeat elephant foot setting or make it harder to remove the brim, but have had success with using both with other slicers with only minor/no issues so it is possible. )
OR disable \ warn one or the other setting when they are both used so stop any confusion.

image

image

brim.zip

@bubnikv
Copy link
Collaborator

bubnikv commented Aug 12, 2021

Duplicate of #3870
It will be changed in PrusaSlicer 2.4.0-alpha1.

@bubnikv bubnikv closed this as completed Aug 12, 2021
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants