This is a port of my raspberry pi thermostat

• This exist case lightening killed my pi zero and there is a silicon shortage making them unobtainable

The contents of the PICO folder goes on the pico W

• The gps_cords.py file contains the location used for calculating sun set/rise
• The wifi_auth.py file contains the wifi SSID and passphrase
• lib/request.py is a patched version of urequests.py
• lib/uasync_requests.py is a patched version of my request.py patched for uasyncio support
• main_with_async_urequests.py is main.py patched to use uasync_requests
  • Not sure if doing that is a good idea, but it is unlikely to matter for this application
• Edit remote_ip and remote_url in main.py as needed on lines 41/42

The contents of server folder goes on your local server You will need to have a data folder in it with read/write access from the page

• mkdir data
• chown www-data:www-data ./data

All the server does is deal with logging data, showing log data, restoring data to the pico after it boots

Note that this server is also running a ntp service

• sudo apt-get install ntp

Hard coded values

• Time zone is set in server/index.php on line 5
  • This code assumes DST will start and end with a single calendar year, see lines 6/10
• Time zone is set in PICO/main.py on line 14
• The DST adjustment is set on line 17 of PICO/lib/TIME.py
  • This is the offset, defaults to 3600 (1 hour), during DST 1 hour is added to the time