Skip to content

Home

Jump to bottom
HomeKid edited this page Nov 21, 2019 · 2 revisions

Welcome to the AMS iAQ Core C wiki!

Donate

Instagram URL FaceBook URL YouTube URL

Basic information

This project is based on AMS iAQ Core C CO2 and VOC sensor that can be found on AliExpress! For Usage please read the Readme file!

Features:

  • Indoor CO2
  • Indoor VOC density

Sensor properties:

The sensor based on technology called MEMS metal oxide sensor technology.

  • It takes about 5 minutes for the sensor to heat up! First functional reading after start up appears in at least 5 minutes. So keep in mind that it takes about 5 minutes for the sensor to work properly!

  • The iAQ-Core sensor module is used to measure VOC levels and provide CO2 equivalent and TVOC equivalent predictions. The data is available via I2C bus. The sensor itself is protected by a plastic cap and a filter membrane, which should NOT be removed and touched.

  • I2C bus SDA and SCL pins must be pulled up via 10K resistors according to iAQ Core C's datasheet!

paypal

Clone this wiki locally