Health Monitoring System

The main aim of the project is to monitor heart rate, body temperature and blood oxygen saturation level of a patient body. It also monitors room humidity and room temperature of the patient room.This system designed by using Arduino Uno. Pulse oxymeter are being used here to measure temperature, blood oxygen level and pulse rate of body. Temperature and humidity sensor are being used to measure room temperature and room humidity. Corona Patient can be benefitted from this technology the most. SMS will be sent to the doctor in case of any critical situation by passing signal to GSM module. A buzzer will be activated so that doctor can pay more attention to the situation.

Made for Level-3 Term-1, CSE316: Microprocessors, Microcontrollers, and Embedded Systems Sessional, created by Ayesha Binte Mostofa (1805062),Zarin Tasnim (1805071) and Nusrat Noor Labiba(1805081)

Under the kind supervision of Dr. A.B.M. Alim Al Islam,Dr. Md. Monirul Islam & Md. Masum Mushfiq Sir

This is a Hardware project. See our Project Demonstration : Youtube Link

We have added block diagram and circuit diagram in the Project Report.

Tools for project

Arduino Uno

Max 30102

LCD 1602

I2C Adapter

GSM Module 900A

DHT11

Buzzer

Power Bank - 5V 2A

BreadBoard

Jumper Wire

Features of Project:

Patient can know his/her body temperature, pulse rate and blood oxygen saturation level

Patient can also know room humidity and room temperature .

He/She can contact doctor through GSM module if pulse rate<60 or pulse rate > 125 or blood oxygen level<90 .

He/she can also contact for room condition when room humidity<40% and room temperature > 36C .

A buzzer will be activated when message will be sent so that doctor can pay more attention to the situation.

A LCD Display will continuously show data for every activity.

Arduino Uno

Code is uploaded here

All components are connected to Arduino via jumper wires and breadboard.

Gives 5V & 3.3V to the components

Max 30102

Measure Body Temperature

Measure heart beats per minnute

Measure Blood oxygen Saturation level

DHT11

Measure Room Temperature

Measure Room Humidity

LCD

1. It shows if the sensors are connected or not.

Finger placed on sensor or not

The data read by DHT11 & Max30102

Message Sending situation