Skip to content

guibom/ESPTempLogger

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ESPTempLogger

alt text

Basic ESP8266 + Attiny85 + DHT22 Temperature and Humidity logger. I've made this to experiment a bit with the ESP8266 wifi module, and hopefully make a remote sensor that posts the data to my server.

I wrote the code to work with both an atmega328 and a attiny85. The mcu sleeps in between readings, consuming about 35uA while powered down (the ESP module, even when chip-disabled, is responsable for about 80% of that).

The UDP messages are very specific to my use case; I have a node-red UDP listener that receives JSON strings from the logger and forward them as MQTT messages. But it should be very easy to change it to send whatever you might need.

Make sure your ESP8266 is using firmware version 0.922, and it's set to use 9600 baud.

It's way easier to tweak the code using a full arduino, then later compiling it for the tiny85 (note that there isn't a lot of space left).

To see the debug messages, make sure to uncomment the line //#define DEBUG

I've used this simple schematic:

alt text

Another similar project that posts temperature to ThingSpeak can be found at http://www.instructables.com/id/ESP8266-Wifi-Temperature-Logger/. I've used this project as a reference for mine.

About

ESP8266 + Attiny85 + DHT22 Temperature/Humidity Logger

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Other 100.0%