feat: Add Visual Basic support #608

Workflow file for this run

.github/workflows/pre-submit.units.yml at 0892eb4

	# Copyright 2023 Google LLC
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	name: tests

	on:
	push:
	branches: [main]
	pull_request:
	# The branches below must be a subset of the branches above
	branches: [main]
	workflow_dispatch:

	permissions:
	contents: read # Needed to check out the repo.

	jobs:
	# Unit tests for Go code
	######################################

	unit-tests:
	name: unit tests
	strategy:
	matrix:
	go-version: [1.20.x]
	os: [ubuntu-latest, macos-latest, windows-latest]
	runs-on: ${{ matrix.os }}
	if: ${{ always() }}
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- uses: actions/setup-go@93397bea11091df50f3d7e59dc26a7711a8bcfbe # v4.1.0
	with:
	go-version: ${{ matrix.go-version }}
	- name: unit tests
	run: \|
	make go-test
	- name: Upload coverage reports to Codecov
	uses: codecov/codecov-action@eaaf4bedf32dbdc6b720b63067d99c4d77d6047d # v3.1.4
	with:
	token: ${{ secrets.CODECOV_TOKEN }}
	files: coverage.out
	fail_ci_if_error: true

	# Unit tests for TypeScript code
	######################################

	ts-tests-matrix:
	name: TypeScript unit tests
	strategy:
	matrix:
	action:
	- actions/issue-reopener
	runs-on: ubuntu-latest
	if: ${{ always() }}
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- uses: actions/setup-node@8f152de45cc393bb48ce5d89d36b731f54556e65 # v4.0.0
	with:
	node-version: 16
	- name: unit tests
	working-directory: ${{ matrix.action }}
	run: \|
	make unit-test
	- name: Upload coverage reports to Codecov
	uses: codecov/codecov-action@eaaf4bedf32dbdc6b720b63067d99c4d77d6047d # v3.1.4
	with:
	token: ${{ secrets.CODECOV_TOKEN }}
	files: "${{ matrix.action }}/coverage/cobertura-coverage.xml"
	fail_ci_if_error: true

	# NOTE: needed for protected branch checks.
	ts-tests:
	runs-on: ubuntu-latest
	needs: ts-tests-matrix
	if: ${{ always() }}
	env:
	TS_TESTS_RESULT: ${{ needs.ts-tests-matrix.result }}
	steps:
	# exit 0 if checks were successful.
	- run: \|
	[ "${TS_TESTS_RESULT}" == "success" ]

	# autogen for license headers
	###############################

	autogen:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	with:
	repository: mbrukman/autogen
	ref: 9026b78e17573b5dda4bff79033c352443551dc5
	path: autogen
	- run: \|
	echo "${GITHUB_WORKSPACE}/autogen" >> "${GITHUB_PATH}"
	- run: make autogen
	- name: check diff
	run: \|
	set -euo pipefail
	if [ "$(GIT_PAGER="cat" git diff --ignore-space-at-eol \| wc -l)" -gt "0" ]; then
	echo "Detected license header changes. See status below:"
	GIT_PAGER="cat" git diff
	exit 1
	fi

	# linters
	###############################

	actionlint:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- name: actionlint
	env:
	SHELLCHECK_VERSION: "0.8.0"
	SHELLCHECK_CHECKSUM: "ab6ee1b178f014d1b86d1e24da20d1139656c8b0ed34d2867fbb834dad02bf0a"
	ACTIONLINT_VERSION: "1.6.24"
	ACTIONLINT_CHECKSUM: "3c5818744143a5d6754edd3dcc4c2b32c9dfcdd3bb30e0e108fb5e5c505262d4"
	run: \|
	set -euo pipefail

	# Install shellcheck
	curl -sSLo shellcheck.tar.gz "https://github.com/koalaman/shellcheck/releases/download/v${SHELLCHECK_VERSION}/shellcheck-v${SHELLCHECK_VERSION}.linux.x86_64.tar.xz"
	echo "shellcheck checksum is $(sha256sum shellcheck.tar.gz \| awk '{ print $1 }')"
	echo "expected checksum is $SHELLCHECK_CHECKSUM"
	echo "$SHELLCHECK_CHECKSUM shellcheck.tar.gz" \| sha256sum --strict --check --status \|\| exit 1

	tar xf shellcheck.tar.gz
	mv "shellcheck-v${SHELLCHECK_VERSION}/shellcheck" /usr/local/bin

	# Install actionlint
	curl -sSLo actionlint.tar.gz "https://github.com/rhysd/actionlint/releases/download/v${ACTIONLINT_VERSION}/actionlint_${ACTIONLINT_VERSION}_linux_amd64.tar.gz"
	echo "actionlint checksum is $(sha256sum actionlint.tar.gz \| awk '{ print $1 }')"
	echo "expected checksum is $ACTIONLINT_CHECKSUM"
	echo "$ACTIONLINT_CHECKSUM actionlint.tar.gz" \| sha256sum --strict --check --status \|\| exit 1

	tar xf actionlint.tar.gz
	mv ./actionlint /usr/local/bin

	make actionlint

	markdownlint:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- uses: actions/setup-node@8f152de45cc393bb48ce5d89d36b731f54556e65 # v4.0.0
	with:
	node-version: 16
	- run: make markdownlint

	golangci-lint:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- uses: actions/setup-go@93397bea11091df50f3d7e59dc26a7711a8bcfbe # v4.1.0
	with:
	go-version-file: "go.mod"
	- env:
	GOLANGCI_LINT_VERSION: "1.53.1"
	GOLANGCI_LINT_CHECKSUM: "6c2f261ca50f54fe06e7be599e7ff7f2f57751175e413944ebcdf67a61ec54ea"
	run: \|
	set -euo pipefail

	#Install golangci-lint
	curl -sSLo golangci-lint.tar.gz "https://github.com/golangci/golangci-lint/releases/download/v${GOLANGCI_LINT_VERSION}/golangci-lint-${GOLANGCI_LINT_VERSION}-linux-amd64.tar.gz"
	echo "golangci-lint checksum is $(sha256sum golangci-lint.tar.gz \| awk '{ print $1 }')"
	echo "expected checksum is $GOLANGCI_LINT_CHECKSUM"
	echo "$GOLANGCI_LINT_CHECKSUM golangci-lint.tar.gz" \| sha256sum --strict --check --status \|\| exit 1
	tar xf golangci-lint.tar.gz
	mv "golangci-lint-${GOLANGCI_LINT_VERSION}-linux-amd64/golangci-lint" /usr/local/bin

	# Run golangci-lint
	make golangci-lint

	eslint:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- uses: actions/setup-node@8f152de45cc393bb48ce5d89d36b731f54556e65 # v4.0.0
	with:
	node-version: 16
	- run: make eslint

	yamllint:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- env:
	YAMLLINT_VERSION: "1.26.3"
	run: \|
	set -euo pipefail

	# Install yamllint
	pip install -r requirements.txt --require-hashes

	# Run yamllint
	make yamllint

	# check-dist for actions
	###############################

	check-dist-matrix:
	runs-on: ubuntu-latest
	strategy:
	matrix:
	action:
	- ./actions/issue-reopener
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1

	- uses: actions/setup-node@8f152de45cc393bb48ce5d89d36b731f54556e65 # v4.0.0
	with:
	node-version: 16

	- name: Rebuild the dist/ directory
	working-directory: ${{ matrix.action }}
	run: make clean package

	- name: Compare the expected and actual dist/ directories
	working-directory: ${{ matrix.action }}
	id: diff
	run: \|
	set -euo pipefail
	if [ "$(git diff --ignore-space-at-eol dist/ \| wc -l)" -gt "0" ]; then
	echo "Detected uncommitted changes after build. See status below:"
	git diff
	exit 1
	fi

	# If dist/ was different from expected, upload the expected version as an artifact
	- uses: actions/upload-artifact@a8a3f3ad30e3422c9c7b888a15615d19a852ae32 # v3.1.3
	if: ${{ failure() && steps.diff.conclusion == 'failure' }}
	with:
	name: dist
	path: ${{ matrix.action }}/dist/

	# NOTE: needed for protected branch checks.
	check-dist:
	runs-on: ubuntu-latest
	needs: check-dist-matrix
	if: ${{ always() }}
	env:
	CHECK_DIST_RESULT: ${{ needs.check-dist-matrix.result }}
	steps:
	# exit 0 if checks were successful.
	- run: \|
	[ "${CHECK_DIST_RESULT}" == "success" ]

	# issue-reopener e2e tests.
	###############################

	issue-reopener-basic:
	runs-on: ubuntu-latest
	# NOTE: Don't run on release since the binaries haven't been created yet.
	if: ${{ ! startsWith(github.event.pull_request.title, 'chore(release):') }}
	outputs:
	issue-url: ${{ steps.create-issue.outputs.url }}
	permissions:
	issues: write
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- id: create-issue
	env:
	GH_TOKEN: ${{ github.token }}
	PR_URL: ${{ github.event.pull_request.html_url }}
	run: \|
	body=""
	if [ "${PR_URL}" != "" ]; then
	body="Test issue for commit $PR ${PR_URL}"
	else
	body="Test issue for commit ${GITHUB_SHA}"
	fi
	body="${body}
	- [Workflow run](https://github.com/${GITHUB_REPOSITORY}/actions/runs/${GITHUB_RUN_ID}/attempts/${GITHUB_RUN_ATTEMPT})"

	url=$(gh issue create -R "${GITHUB_REPOSITORY}" --title "issue-reopener-basic pre-submit test issue" --body "${body}")
	echo "${url}"
	gh issue close "${url}"
	mkdir test
	echo "// TODO(${url}): still open" > test/test.go
	echo "url=${url}" >> "${GITHUB_OUTPUT}"
	- uses: ./actions/issue-reopener/
	with:
	path: "test/"
	- env:
	GH_TOKEN: ${{ github.token }}
	ISSUE_URL: ${{ steps.create-issue.outputs.url }}
	run: \|
	# Ensure the issue was reopened.
	state=$(gh issue view "${ISSUE_URL}" --json state \| jq -r '.state')
	[ "${state}" == "OPEN" ]

	# Check that the body contains the right path
	# NOTE: Need to get text output in order to get issue comments.
	body=$(gh issue view "${ISSUE_URL}" -c)
	[[ "${body}" == "1. [test/test.go:1]" ]]

	issue-reopener-basic-cleanup:
	runs-on: ubuntu-latest
	needs: issue-reopener-basic
	if: ${{ always() }}
	permissions:
	issues: write
	steps:
	- env:
	ISSUE_URL: ${{ needs.issue-reopener-basic.outputs.issue-url }}
	GH_TOKEN: ${{ github.token }}
	run: \|
	# Close the test issue.
	gh issue close "${ISSUE_URL}" \|\| true

	issue-reopener-dry-run:
	runs-on: ubuntu-latest
	# NOTE: Don't run on release since the binaries haven't been created yet.
	if: ${{ ! startsWith(github.event.pull_request.title, 'chore(release):') }}
	outputs:
	issue-url: ${{ steps.create-issue.outputs.url }}
	permissions:
	issues: write
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	- id: create-issue
	env:
	GH_TOKEN: ${{ github.token }}
	PR_URL: ${{ github.event.pull_request.html_url }}
	run: \|
	body=""
	if [ "${PR_URL}" != "" ]; then
	body="Test issue for commit $PR ${PR_URL}"
	else
	body="Test issue for commit ${GITHUB_SHA}"
	fi
	body="${body}
	- [Workflow run](https://github.com/${GITHUB_REPOSITORY}/actions/runs/${GITHUB_RUN_ID}/attempts/${GITHUB_RUN_ATTEMPT})"

	url=$(gh issue create --title "issue-reopener-dry-run pre-submit test issue" --body "${body}")
	echo "${url}"
	gh issue close "${url}"
	mkdir test
	echo "// TODO(${url}): still open" > test/test.go
	echo "url=${url}" >> "${GITHUB_OUTPUT}"
	- uses: ./actions/issue-reopener/
	with:
	path: "test/"
	dry-run: true
	- env:
	GH_TOKEN: ${{ github.token }}
	ISSUE_URL: ${{ steps.create-issue.outputs.url }}
	run: \|
	# Ensure the issue was not reopened.
	state=$(gh issue view "${ISSUE_URL}" --json state \| jq -r '.state')
	[ "${state}" == "CLOSED" ]

	issue-reopener-dry-run-cleanup:
	runs-on: ubuntu-latest
	needs: issue-reopener-dry-run
	if: ${{ always() }}
	permissions:
	issues: write
	steps:
	- env:
	ISSUE_URL: ${{ needs.issue-reopener-dry-run.outputs.issue-url }}
	GH_TOKEN: ${{ github.token }}
	run: \|
	# Ensure the the test issue is closed even if test fails.
	gh issue close "${ISSUE_URL}" \|\| true

	issue-reopener-subdir:
	runs-on: ubuntu-latest
	# NOTE: Don't run on release since the binaries haven't been created yet.
	if: ${{ ! startsWith(github.event.pull_request.title, 'chore(release):') }}
	outputs:
	issue-url: ${{ steps.create-issue.outputs.url }}
	permissions:
	issues: write
	steps:
	- uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
	with:
	path: "repo"

	- id: create-issue
	env:
	GH_TOKEN: ${{ github.token }}
	PR_URL: ${{ github.event.pull_request.html_url }}
	run: \|
	body=""
	if [ "${PR_URL}" != "" ]; then
	body="Test issue for commit $PR ${PR_URL}"
	else
	body="Test issue for commit ${GITHUB_SHA}"
	fi
	body="${body}
	- [Workflow run](https://github.com/${GITHUB_REPOSITORY}/actions/runs/${GITHUB_RUN_ID}/attempts/${GITHUB_RUN_ATTEMPT})"

	url=$(gh issue create -R "${GITHUB_REPOSITORY}" --title "issue-reopener-subdir pre-submit test issue" --body "${body}")
	echo "${url}"
	gh issue close "${url}"
	mkdir -p repo/test
	echo "// TODO(${url}): still open" > repo/test/test.go
	echo "url=${url}" >> "${GITHUB_OUTPUT}"
	- uses: ./repo/actions/issue-reopener/
	with:
	path: "repo/test"
	- env:
	GH_TOKEN: ${{ github.token }}
	ISSUE_URL: ${{ steps.create-issue.outputs.url }}
	run: \|
	# Ensure the issue was reopened.
	state=$(gh issue view "${ISSUE_URL}" --json state \| jq -r '.state')
	[ "${state}" == "OPEN" ]

	# Check that the body contains the right path
	# NOTE: Need to get text output in order to get issue comments.
	body=$(gh issue view "${ISSUE_URL}" -c)
	[[ "${body}" == "1. [test/test.go:1]" ]]

	issue-reopener-subdir-cleanup:
	runs-on: ubuntu-latest
	needs: issue-reopener-subdir
	if: ${{ always() }}
	permissions:
	issues: write
	steps:
	- env:
	ISSUE_URL: ${{ needs.issue-reopener-subdir.outputs.issue-url }}
	GH_TOKEN: ${{ github.token }}
	run: \|
	# Close the test issue.
	gh issue close "${ISSUE_URL}" \|\| true

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

feat: Add Visual Basic support #608

Workflow file

feat: Add Visual Basic support #608

Jobs

Run details

Workflow file for this run