Coffee Lake support #14

vmbuilder00x0 · 2018-01-23T03:34:48Z

Hi,

Can you clarify if Coffee Lake processors are supported and if it is, which kernel version already have it upstream (ubuntu), or do we need to compile one ourselves if we're using one of 4.13.x.

Thanks and regards!

commit 2cb90ed upstream. This is a little more efficient, and avoids the warning WARNING: possible circular locking dependency detected 4.14.0-rc7-00007 #14 Not tainted ------------------------------------------------------ alsactl/330 is trying to acquire lock: (prepare_lock){+.+.}, at: [<c049300c>] clk_prepare_lock+0x80/0xf4 but task is already holding lock: (i2c_register_adapter){+.+.}, at: [<c0690ae0>] i2c_adapter_lock_bus+0x14/0x18 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (i2c_register_adapter){+.+.}: rt_mutex_lock+0x44/0x5c i2c_adapter_lock_bus+0x14/0x18 i2c_transfer+0xa8/0xbc i2c_smbus_xfer+0x20c/0x5d8 i2c_smbus_read_byte_data+0x38/0x48 m41t80_sqw_recalc_rate+0x24/0x58 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

for_each_set_bit() only accepts variable of type unsigned long, and we can not cast it from smaller types. [ 16.499365] ================================================================== [ 16.506655] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x1d/0x70 [ 16.513313] Read of size 8 at addr ffff8803616cf510 by task systemd-udevd/180 [ 16.521998] CPU: 0 PID: 180 Comm: systemd-udevd Tainted: G U O 4.15.0-rc3+ #14 [ 16.530317] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 16.537760] Call Trace: [ 16.540230] dump_stack+0x7c/0xbb [ 16.543569] print_address_description+0x6b/0x290 [ 16.548306] kasan_report+0x28a/0x370 [ 16.551993] ? find_first_bit+0x1d/0x70 [ 16.555858] find_first_bit+0x1d/0x70 [ 16.559625] intel_gvt_init_cmd_parser+0x127/0x3c0 [i915] [ 16.565060] ? __lock_is_held+0x8f/0xf0 [ 16.568990] ? intel_gvt_clean_cmd_parser+0x10/0x10 [i915] [ 16.574514] ? __hrtimer_init+0x5d/0xb0 [ 16.578445] intel_gvt_init_device+0x2c3/0x690 [i915] [ 16.583537] ? unregister_module_notifier+0x20/0x20 [ 16.588515] intel_gvt_init+0x89/0x100 [i915] [ 16.592962] i915_driver_load+0x1992/0x1c70 [i915] [ 16.597846] ? __i915_printk+0x210/0x210 [i915] [ 16.602410] ? wait_for_completion+0x280/0x280 [ 16.606883] ? lock_downgrade+0x2c0/0x2c0 [ 16.610923] ? __pm_runtime_resume+0x46/0x90 [ 16.615238] ? acpi_dev_found+0x76/0x80 [ 16.619162] ? i915_pci_remove+0x30/0x30 [i915] [ 16.623733] local_pci_probe+0x74/0xe0 [ 16.627518] pci_device_probe+0x208/0x310 [ 16.631561] ? pci_device_remove+0x100/0x100 [ 16.635871] ? __list_add_valid+0x29/0xa0 [ 16.639919] driver_probe_device+0x40b/0x6b0 [ 16.644223] ? driver_probe_device+0x6b0/0x6b0 [ 16.648696] __driver_attach+0x11d/0x130 [ 16.652649] bus_for_each_dev+0xe7/0x160 [ 16.656600] ? subsys_dev_iter_exit+0x10/0x10 [ 16.660987] ? __list_add_valid+0x29/0xa0 [ 16.665028] bus_add_driver+0x31d/0x3a0 [ 16.668893] driver_register+0xc6/0x170 [ 16.672758] ? 0xffffffffc0ad8000 [ 16.676108] do_one_initcall+0x9c/0x206 [ 16.679984] ? initcall_blacklisted+0x150/0x150 [ 16.684545] ? do_init_module+0x35/0x33b [ 16.688494] ? kasan_unpoison_shadow+0x31/0x40 [ 16.692968] ? kasan_kmalloc+0xa6/0xd0 [ 16.696743] ? do_init_module+0x35/0x33b [ 16.700694] ? kasan_unpoison_shadow+0x31/0x40 [ 16.705168] ? __asan_register_globals+0x82/0xa0 [ 16.709819] do_init_module+0xe7/0x33b [ 16.713597] load_module+0x4481/0x4ce0 [ 16.717397] ? module_frob_arch_sections+0x20/0x20 [ 16.722228] ? vfs_read+0x13b/0x190 [ 16.725742] ? kernel_read+0x74/0xa0 [ 16.729351] ? get_user_arg_ptr.isra.17+0x70/0x70 [ 16.734099] ? SYSC_finit_module+0x175/0x1b0 [ 16.738399] SYSC_finit_module+0x175/0x1b0 [ 16.742524] ? SYSC_init_module+0x1e0/0x1e0 [ 16.746741] ? __fget+0x157/0x240 [ 16.750090] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 16.754747] entry_SYSCALL_64_fastpath+0x23/0x9a [ 16.759397] RIP: 0033:0x7f8fbc837499 [ 16.762996] RSP: 002b:00007ffead76c138 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 16.770618] RAX: ffffffffffffffda RBX: 0000000000000012 RCX: 00007f8fbc837499 [ 16.777800] RDX: 0000000000000000 RSI: 000056484e67b080 RDI: 0000000000000012 [ 16.784979] RBP: 00007ffead76b140 R08: 0000000000000000 R09: 0000000000000021 [ 16.792164] R10: 0000000000000012 R11: 0000000000000246 R12: 000056484e67b460 [ 16.799345] R13: 00007ffead76b120 R14: 0000000000000005 R15: 0000000000000000 [ 16.808052] The buggy address belongs to the page: [ 16.812876] page:00000000dc4b8c1e count:0 mapcount:0 mapping: (null) index:0x0 [ 16.820934] flags: 0x17ffffc0000000() [ 16.824621] raw: 0017ffffc0000000 0000000000000000 0000000000000000 00000000ffffffff [ 16.832416] raw: ffffea000d85b3e0 ffffea000d85b3e0 0000000000000000 0000000000000000 [ 16.840208] page dumped because: kasan: bad access detected [ 16.847318] Memory state around the buggy address: [ 16.852143] ffff8803616cf400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.859427] ffff8803616cf480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 [ 16.866708] >ffff8803616cf500: f1 f1 04 f4 f4 f4 f3 f3 f3 f3 00 00 00 00 00 00 [ 16.873988] ^ [ 16.877770] ffff8803616cf580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.885042] ffff8803616cf600: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 16.892312] ================================================================== Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

TerrenceXu · 2018-02-06T09:49:45Z

No, we are not support Coffee Lake processors, thanks. ☺ Thanks Terrence From: vmbuilder00x0 [mailto:notifications@github.com] Sent: Tuesday, January 23, 2018 11:35 AM To: intel/gvt-linux <gvt-linux@noreply.github.com> Cc: Subscribed <subscribed@noreply.github.com> Subject: [intel/gvt-linux] Coffee Lake support (#14) Hi, Can you clarify if Coffee Lake processors are supported and if it is, which kernel version already have it upstream (ubuntu), or do we need to compile one ourselves if we're using one of 4.13.x. Thanks and regards! — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#14>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AYv0NN-bxFuWNDkpkAxAw4TKBqvW9__dks5tNVNZgaJpZM4RpBCI>.

ghost · 2018-03-03T11:03:18Z

@TerrenceXu Hello! Are there any plans to support Coffee Lake or even Cannon Lake in the foreseeable future? I am building a PC now, so it would be great to know if I should stop on KBL or there is some hope. Thanks!

TerrenceXu · 2018-03-05T06:52:51Z

Hello, now we only support Skylake and Kabylake, and next plan is support Icelake but not Coffee Lake or Cannon Lake. ☺ From: Unb9rn [mailto:notifications@github.com] Sent: Saturday, March 3, 2018 7:03 PM To: intel/gvt-linux <gvt-linux@noreply.github.com> Cc: Xu, Terrence <terrence.xu@intel.com>; Comment <comment@noreply.github.com> Subject: Re: [intel/gvt-linux] Coffee Lake support (#14) Hello! Are there any plans to support Coffee Lake or even Cannon Lake in the foreseeable future? I am building a PC now, so it would be great to know if I should stop on KBL or there is some hope. Thanks! — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#14 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AYv0NPu8U2DCfKTi4QdV8T9T5QlB57U-ks5tanh3gaJpZM4RpBCI>.

zerotri · 2018-03-05T23:51:01Z

In relation to microarchitecture support, are there plans to support Kaby Lake R? Everything I've seen seems to indicate that this is largely compatible with Kaby Lake in terms of feature set. Would extending the driver to support the R series graphics be a considerable amount of work?

TerrenceXu · 2018-03-08T07:43:02Z

Yes, the R is also working. ☺ From: Wynter Woods [mailto:notifications@github.com] Sent: Tuesday, March 6, 2018 7:51 AM To: intel/gvt-linux <gvt-linux@noreply.github.com> Cc: Xu, Terrence <terrence.xu@intel.com>; Mention <mention@noreply.github.com> Subject: Re: [intel/gvt-linux] Coffee Lake support (#14) In relation to microarchitecture support, are there plans to support Kaby Lake R? Everything I've seen seems to indicate that this is largely compatible with Kaby Lake in terms of feature set. Would extending the driver to support the R series graphics be a considerable amount of work? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub<#14 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AYv0NLCghYW_Q6Aipu_H8--Ea7__U2oZks5tbc9mgaJpZM4RpBCI>.

syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread #32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed8 ("nsh: add GSO support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Benc <jbenc@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

chp-io · 2018-08-04T05:30:48Z

Could you please also confirm support for i9 Skylake-X 7900x series?
Thank you

Edit: Nevermind, they don't have integrated graphics

TerrenceXu · 2018-08-06T12:52:01Z

@chp-io, yes, we support all Skylake platforms.

Enverex · 2018-08-08T13:36:27Z

Can I ask why? It seems weird to have a hole in support. Old processors aren't supported (which is fair enough), old-ish processors are supported, current processors aren't supported, but future processors will be supported? Missing the current generation seems like a strange choice.

zerotri · 2018-10-02T00:19:45Z

Hello,

With the upcoming Coffee Lake chips releasing soon, I wanted to inquire about this further.
Are Coffee Lake chips missing key functionality necessary for GVT-g support or could they be made to work through proper software configuration of the hardware?

Would anyone investing in Coffee Lake be entirely out of luck or is this just a matter of someone adding the support for enumerating the newer chips? The GPUs look to be mostly the same series across Kaby Lake and Coffee Lake families.

TerrenceXu · 2018-10-16T16:48:13Z

Hello,

With the upcoming Coffee Lake chips releasing soon, I wanted to inquire about this further.
Are Coffee Lake chips missing key functionality necessary for GVT-g support or could they be made to work through proper software configuration of the hardware?

Would anyone investing in Coffee Lake be entirely out of luck or is this just a matter of someone adding the support for enumerating the newer chips? The GPUs look to be mostly the same series across Kaby Lake and Coffee Lake families.

Until now we have no plan on investigate Coffee Lake.

CuriousTommy · 2018-10-17T01:10:59Z

Until now we have no plan on investigating Coffee Lake.

I hope that this "investigation" leads to GVT support for Coffee Lake. I am planning to buy an i9-9900k processor for a future build. I would love to mess around with this very interesting feature on that hardware.

When booting kernel with LOCKDEP option, below warning info was found: WARNING: possible recursive locking detected 4.19.0-rc7+ #14 Not tainted -------------------------------------------- swapper/0/1 is trying to acquire lock: 00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] 00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850 but task is already holding lock: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&list->lock)->rlock#4); lock(&(&list->lock)->rlock#4); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by swapper/0/1: #0: 00000000f7539d34 (pernet_ops_rwsem){+.+.}, at: register_pernet_subsys+0x19/0x40 net/core/net_namespace.c:1051 #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849 stack backtrace: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7+ #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1af/0x295 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1759 [inline] check_deadlock kernel/locking/lockdep.c:1803 [inline] validate_chain kernel/locking/lockdep.c:2399 [inline] __lock_acquire+0xf1e/0x3c60 kernel/locking/lockdep.c:3411 lock_acquire+0x1db/0x520 kernel/locking/lockdep.c:3900 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850 tipc_link_bc_create+0xb5/0x1f0 net/tipc/link.c:526 tipc_bcast_init+0x59b/0xab0 net/tipc/bcast.c:521 tipc_init_net+0x472/0x610 net/tipc/core.c:82 ops_init+0xf7/0x520 net/core/net_namespace.c:129 __register_pernet_operations net/core/net_namespace.c:940 [inline] register_pernet_operations+0x453/0xac0 net/core/net_namespace.c:1011 register_pernet_subsys+0x28/0x40 net/core/net_namespace.c:1052 tipc_init+0x83/0x104 net/tipc/core.c:140 do_one_initcall+0x109/0x70a init/main.c:885 do_initcall_level init/main.c:953 [inline] do_initcalls init/main.c:961 [inline] do_basic_setup init/main.c:979 [inline] kernel_init_freeable+0x4bd/0x57f init/main.c:1144 kernel_init+0x13/0x180 init/main.c:1063 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413 The reason why the noise above was complained by LOCKDEP is because we nested to hold l->wakeupq.lock and l->inputq->lock in tipc_link_reset function. In fact it's unnecessary to move skb buffer from l->wakeupq queue to l->inputq queue while holding the two locks at the same time. Instead, we can move skb buffers in l->wakeupq queue to a temporary list first and then move the buffers of the temporary list to l->inputq queue, which is also safe for us. Fixes: 3f32d0b ("tipc: lock wakeup & inputq at tipc_link_reset()") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>

polarathene · 2018-10-20T09:01:52Z

Until now we have no plan on investigate Coffee Lake.

@TerrenceXu Could you please clarify that? Do you mean Coffee Lake may get support? Or misunderstanding and Coffee Lake will not get support as mentioned earlier?

TerrenceXu · 2018-10-23T03:26:51Z

At least until now we pay no effort on Coffee Lake, it depends on whether any customer want to support use Coffee Lake in the future.

CuriousTommy · 2018-10-23T04:12:11Z

it depends on whether any customer want to support use Coffee Lake in the future.

@TerrenceXu So how do you want us to show our desire for Coffee Lake support?

vmbuilder00x0 · 2018-10-23T04:35:01Z

I think, hardware wise, the coffeelake is a much better choice as a virtualization platform since it have more cores than the previous gen (I speak of the i5's 8xxx) and for people considering using these might use the current gen hw instead.

I guess it's understandable if there's some hw limitations that prevents these being used in coffeelake arch (which is what I assumed when first you replied), but if it's actually possible I think more people will test/use it with buying new coffeelake setup (rather than repurposing their current pc/setup).

Just my opinion. Great works though, still working out to seek prev gens setups (second hand, not buying new I guess).

hyuan3 · 2018-10-23T04:53:12Z

GVT was initialized to support Intel data center processors. But we are glad to see GVT used in client processors as well and would like to provide support as much as we can. On the request for GVT to support more platforms, besides talking here, you could tell Intel contact if you have. This will help to improve the work's priority.

vmbuilder00x0 · 2018-10-23T05:29:03Z

Can't speak for others, but I knew a handful of people who will use (and test) these religiously (hint: homelab/vfio communities). Will also request them to write to Intel. Thanks for the explanations!

slis · 2018-11-02T12:59:47Z

+1

kbrons · 2018-11-03T14:20:41Z

+1

ryandward · 2018-11-11T19:37:06Z

Not to be recalcitrant but the dev comments here are totally circular in logic. There are people here asking for Coffee Lake support, and the devs are saying they won't support it because consumers don't want it.

hyuan3 · 2018-11-12T01:46:52Z

CFL is not supported now but it doesn't mean it will not be supported in the future. We are planning the work.

Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - #8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... #9 blkif_free at ffffffffa0149aaa [xen_blkfront] #10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] #11 blkback_changed at ffffffffa014ea8b [xen_blkfront] #12 xenbus_otherend_changed at ffffffff81424670 #13 backend_changed at ffffffff81426dc3 #14 xenwatch_thread at ffffffff81422f29 #15 kthread at ffffffff810abe6a #16 ret_from_fork at ffffffff81754078 Cc: stable@vger.kernel.org Fixes: 7ed8ce1 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>

There are actually two kinds of discard merge: - one is the normal discard merge, just like normal read/write request, and call it single-range discard - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1 For the former case, queue_max_discard_segments(rq->q) is 1, and we should handle this kind of discard merge like the normal read/write request. This patch fixes the following kernel panic issue[1], which is caused by not removing the single-range discard request from elevator queue. Guangwu has one raid discard test case, in which this issue is a bit easier to trigger, and I verified that this patch can fix the kernel panic issue in Guangwu's test case. [1] kernel panic log from Jens's report BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 PGD 0 P4D 0. Oops: 0000 [#1] SMP PTI CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \ 4.20.0-rc3-00649-ge64d9a554a91-dirty #14 Hardware name: Wiwynn \ Leopard-Orv2/Leopard-DDR BW, BIOS LBM08 03/03/2017 Workqueue: kblockd \ blk_mq_run_work_fn RIP: \ 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 \ 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \ 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \ f6 87 b0 00 00 00 02 RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246 \ RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000 FS: 0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_dispatch_rq_list+0xec/0x480 ? elv_rb_del+0x11/0x30 blk_mq_do_dispatch_sched+0x6e/0xf0 blk_mq_sched_dispatch_requests+0xfa/0x170 __blk_mq_run_hw_queue+0x5f/0xe0 process_one_work+0x154/0x350 worker_thread+0x46/0x3c0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x1f/0x30 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \ kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \ cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \ button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \ nvme_core fuse sg loop efivarfs autofs4 CR2: 0000000000000148 \ ---[ end trace 340a1fb996df1b9b ]--- RIP: 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \ 00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \ 20 72 37 f6 87 b0 00 00 00 02 Fixes: 445251d ("blk-mq: fix discard merge with scheduler attached") Reported-by: Jens Axboe <axboe@kernel.dk> Cc: Guangwu Zhang <guazhang@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

TerrenceXu · 2019-07-22T09:42:52Z

@renne, what is the corresponding GPU generation of G4900? Intel® UHD Graphics 610? If it is 610, it is Coffee Lake, both KVMGT and GPU passthrough (GVT-d KVM) are supported it in the latest kernel.

KVMGT supported from 5.1, GVT-d depend on which version introduced the i915 support for Coffee Lake.

renne · 2019-07-22T15:40:38Z

@TerrenceXu

renne@cloud:~$ cat /proc/cpuinfo 
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 158
model name	: Intel(R) Celeron(R) G4900 CPU @ 3.10GHz
stepping	: 11
microcode	: 0xb4
cpu MHz		: 1600.061
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 22
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust smep erms invpcid mpx rdseed smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d
bugs		: cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds
bogomips	: 6192.00
clflush size	: 64
cache_alignment	: 64
address sizes	: 39 bits physical, 48 bits virtual
power management:

renne@cloud:~$ lspci -knn
...
00:02.0 Display controller [0380]: Intel Corporation UHD Graphics 610 [8086:3e93]
	Subsystem: Fujitsu Technology Solutions UHD Graphics 610 [1734:124a]
	Kernel driver in use: vfio-pci
	Kernel modules: i915
...
00:1f.3 Audio device [0403]: Intel Corporation Cannon Lake PCH cAVS [8086:a348] (rev 10)
	Subsystem: Fujitsu Technology Solutions Cannon Lake PCH cAVS [1734:1247]
	Kernel driver in use: vfio-pci
	Kernel modules: snd_hda_intel
...
03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208 [GeForce GT 710B] [10de:128b] (rev a1)
	Subsystem: ZOTAC International (MCO) Ltd. GK208B [GeForce GT 710] [19da:5360]
	Kernel driver in use: nouveau
	Kernel modules: nouveau
03:00.1 Audio device [0403]: NVIDIA Corporation GK208 HDMI/DP Audio Controller [10de:0e0f] (rev a1)
	Subsystem: ZOTAC International (MCO) Ltd. GK208 HDMI/DP Audio Controller [19da:5360]
	Kernel modules: snd_hda_intel
...

renne@cloud:~$ uname -a
Linux cloud 4.19.0-5-amd64 #1 SMP Debian 4.19.37-5 (2019-06-19) x86_64 GNU/Linux

Is there any way to get iGPU passthrough working with KVM on Debian 10?
The goal is to run Libreelec in a KVM virtual machine on the iGPU with HDMI audio/video output.

TerrenceXu · 2019-07-23T13:13:58Z

@renne, it depends on your GPU generation, you can check GPU version by "glxinfo|grep Mesa"

renne · 2019-07-23T14:58:19Z

@TerrenceXu
The Debian 10 KVM host doesn't have a X11-server or wayland. It is console only. Is there any other tool besides glxinfo to get info about the GPU generation of Intel devices? The only information I could find is "Intel Corporation UHD Graphics 610" from the lscpi output.

TerrenceXu · 2019-07-24T05:22:14Z

@renne, OK, this GPU is supported in KVMGT from kernel 5.1.

A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>

Revert the commit bd293d0. The proper fix has been made available with commit d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d0 doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: bd293d0 ("dm bufio: fix deadlock with loop device") Depends-on: d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread") Signed-off-by: Mike Snitzer <snitzer@redhat.com>

…pointer release Karsten reported the following panic in __free_slab() happening on a s390x machine: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:00000000017d4007 R3:000000007fbd0007 S:000000007fbff000 P:000000000000003d Oops: 0004 ilc:3 Ý#1¨ PREEMPT SMP Modules linked in: tcp_diag inet_diag xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_at nf_nat CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-05872-g6133e3e4bada-dirty #14 Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0) Krnl PSW : 0704d00180000000 00000000003cadb6 (__free_slab+0x686/0x6b0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 00000000f3a32928 0000000000000000 000000007fbf5d00 000000000117c4b8 0000000000000000 000000009e3291c1 0000000000000000 0000000000000000 0000000000000003 0000000000000008 000000002b478b00 000003d080a97600 0000000000000003 0000000000000008 000000002b478b00 000003d080a97600 000000000117ba00 000003e000057db0 00000000003cabcc 000003e000057c78 Krnl Code: 00000000003cada6: e310a1400004 lg %r1,320(%r10) 00000000003cadac: c0e50046c286 brasl %r14,ca32b8 #00000000003cadb2: a7f4fe36 brc 15,3caa1e >00000000003cadb6: e32060800024 stg %r2,128(%r6) 00000000003cadbc: a7f4fd9e brc 15,3ca8f8 00000000003cadc0: c0e50046790c brasl %r14,c99fd8 00000000003cadc6: a7f4fe2c brc 15,3caa 00000000003cadc6: a7f4fe2c brc 15,3caa1e 00000000003cadca: ecb1ffff00d9 aghik %r11,%r1,-1 Call Trace: (<00000000003cabcc> __free_slab+0x49c/0x6b0) <00000000001f5886> rcu_core+0x5a6/0x7e0 <0000000000ca2dea> __do_softirq+0xf2/0x5c0 <0000000000152644> irq_exit+0x104/0x130 <000000000010d222> do_IRQ+0x9a/0xf0 <0000000000ca2344> ext_int_handler+0x130/0x134 <0000000000103648> enabled_wait+0x58/0x128 (<0000000000103634> enabled_wait+0x44/0x128) <0000000000103b00> arch_cpu_idle+0x40/0x58 <0000000000ca0544> default_idle_call+0x3c/0x68 <000000000018eaa4> do_idle+0xec/0x1c0 <000000000018ee0e> cpu_startup_entry+0x36/0x40 <000000000122df34> arch_call_rest_init+0x5c/0x88 <0000000000000000> 0x0 INFO: lockdep is turned off. Last Breaking-Event-Address: <00000000003ca8f4> __free_slab+0x1c4/0x6b0 Kernel panic - not syncing: Fatal exception in interrupt The kernel panics on an attempt to dereference the NULL memcg pointer. When shutdown_cache() is called from the kmem_cache_destroy() context, a memcg kmem_cache might have empty slab pages in a partial list, which are still charged to the memory cgroup. These pages are released by free_partial() at the beginning of shutdown_cache(): either directly or by scheduling a RCU-delayed work (if the kmem_cache has the SLAB_TYPESAFE_BY_RCU flag). The latter case is when the reported panic can happen: memcg_unlink_cache() is called immediately after shrinking partial lists, without waiting for scheduled RCU works. It sets the kmem_cache->memcg_params.memcg pointer to NULL, and the following attempt to dereference it by __free_slab() from the RCU work context causes the panic. To fix the issue, let's postpone the release of the memcg pointer to destroy_memcg_params(). It's called from a separate work context by slab_caches_to_rcu_destroy_workfn(), which contains a full RCU barrier. This guarantees that all scheduled page release RCU works will complete before the memcg pointer will be zeroed. Big thanks for Karsten for the perfect report containing all necessary information, his help with the analysis of the problem and testing of the fix. Link: http://lkml.kernel.org/r/20191010160549.1584316-1-guro@fb.com Fixes: fb2f2b0 ("mm: memcg/slab: reparent memcg kmem_caches on cgroup removal") Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Karsten Graul <kgraul@linux.ibm.com> Tested-by: Karsten Graul <kgraul@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Karsten Graul <kgraul@linux.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fatal read errors are worth warning about, unless of course the device was just unplugged from the machine - something that's a rather normal occurrence when the igb/igc adapter is located on a Thunderbolt dock. So, let's only WARN() if there's a fatal read error while the device is still present. This fixes the following WARN splat that's been appearing whenever I unplug my Caldigit TS3 Thunderbolt dock from my laptop: igb 0000:09:00.0 enp9s0: PCIe link lost ------------[ cut here ]------------ igb: Failed to read reg 0x18! WARNING: CPU: 7 PID: 516 at drivers/net/ethernet/intel/igb/igb_main.c:756 igb_rd32+0x57/0x6a [igb] Modules linked in: igb dca thunderbolt fuse vfat fat elan_i2c mei_wdt mei_hdcp i915 wmi_bmof intel_wmi_thunderbolt iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp joydev coretemp crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel intel_cstate drm_kms_helper intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops intel_rapl_perf intel_xhci_usb_role_switch mei_me drm roles idma64 i2c_i801 ucsi_acpi typec_ucsi mei intel_lpss_pci processor_thermal_device typec intel_pch_thermal intel_soc_dts_iosf intel_lpss int3403_thermal thinkpad_acpi wmi int340x_thermal_zone ledtrig_audio int3400_thermal acpi_thermal_rel acpi_pad video pcc_cpufreq ip_tables serio_raw nvme nvme_core crc32c_intel uas usb_storage e1000e i2c_dev CPU: 7 PID: 516 Comm: kworker/u16:3 Not tainted 5.2.0-rc1Lyude-Test+ #14 Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:igb_rd32+0x57/0x6a [igb] Code: 87 b8 fc ff ff 48 c7 47 08 00 00 00 00 48 c7 c6 33 42 9b c0 4c 89 c7 e8 47 45 cd dc 89 ee 48 c7 c7 43 42 9b c0 e8 c1 94 71 dc <0f> 0b eb 08 8b 00 ff c0 75 b0 eb c8 44 89 e0 5d 41 5c c3 0f 1f 44 RSP: 0018:ffffba5801cf7c48 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e7956608840 RCX: 0000000000000007 RDX: 0000000000000000 RSI: ffffba5801cf7b24 RDI: ffff9e795e3d6a00 RBP: 0000000000000018 R08: 000000009dec4a01 R09: ffffffff9e61018f R10: 0000000000000000 R11: ffffba5801cf7ae5 R12: 00000000ffffffff R13: ffff9e7956608840 R14: ffff9e795a6f10b0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e795e3c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564317bc4088 CR3: 000000010e00a006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: igb_release_hw_control+0x1a/0x30 [igb] igb_remove+0xc5/0x14b [igb] pci_device_remove+0x3b/0x93 device_release_driver_internal+0xd7/0x17e pci_stop_bus_device+0x36/0x75 pci_stop_bus_device+0x66/0x75 pci_stop_bus_device+0x66/0x75 pci_stop_and_remove_bus_device+0xf/0x19 trim_stale_devices+0xc5/0x13a ? __pm_runtime_resume+0x6e/0x7b trim_stale_devices+0x103/0x13a ? __pm_runtime_resume+0x6e/0x7b trim_stale_devices+0x103/0x13a acpiphp_check_bridge+0xd8/0xf5 acpiphp_hotplug_notify+0xf7/0x14b ? acpiphp_check_bridge+0xf5/0xf5 acpi_device_hotplug+0x357/0x3b5 acpi_hotplug_work_fn+0x1a/0x23 process_one_work+0x1a7/0x296 worker_thread+0x1a8/0x24c ? process_scheduled_works+0x2c/0x2c kthread+0xe9/0xee ? kthread_destroy_worker+0x41/0x41 ret_from_fork+0x35/0x40 ---[ end trace 252bf10352c63d22 ]--- Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 47e1669 ("igb/igc: warn when fatal read failure happens") Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Acked-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This reverts commit 3df85a1. The reverted commit says "It's possible to release the node ID immediately when fwnode_remove_software_node() is called, no need to wait for software_node_release() with that." However, releasing the node ID before waiting for software_node_release() to be called causes the node ID to be released before the kobject and the underlying sysfs entry; this means there is a period of time where a sysfs entry exists that is associated with an unallocated node ID. Once consequence of this is that there is a race condition where it is possible to call fwnode_create_software_node() with no parent node specified (NULL) and have it fail with -EEXIST because the node ID that was assigned is still associated with a stale sysfs entry that hasn't been cleaned up yet. Although it is difficult to reproduce this race condition under normal conditions, it can be deterministically reproduced with the following minconfig on UML: CONFIG_KUNIT_DRIVER_PE_TEST=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_KOBJECT_RELEASE=y CONFIG_KUNIT=y Running the tests with this configuration causes the following failure: <snip> kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 400) ok 1 - pe_test_uints sysfs: cannot create duplicate filename '/kernel/software_nodes/node0' CPU: 0 PID: 28 Comm: kunit_try_catch Not tainted 5.6.0-rc3-next-20200227 #14 <snip> kobject_add_internal failed for node0 with -EEXIST, don't try to register things with the same name in the same directory. kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 100) # pe_test_uint_arrays: ASSERTION FAILED at drivers/base/test/property-entry-test.c:123 Expected node is not error, but is: -17 not ok 2 - pe_test_uint_arrays <snip> Reported-by: Heidi Fahim <heidifahim@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: --- a/tools/trace.py +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com

woulf · 2020-06-15T14:05:02Z

Hello, i can see the core series referenced up to the 9th generation,
does it also apply to "Workstation" Xeon (E-21XX, E-22XX)?
For instance is the Xeon E-2288G, with an Intel® UHD P630, supported?

…s metrics" test Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 #9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 #12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91 ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 #10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 #18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4 ("perf tools: Add test_generic_metric function") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The metricgroup__add_metric() can find multiple match for a metric group and it's possible to fail. Also it can fail in the middle like in resolve_metric() even for single metric. In those cases, the intermediate list and ids will be leaked like: Direct leak of 3 byte(s) in 1 object(s) allocated from: #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683 #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906 #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940 #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993 #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045 #6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087 #7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164 #8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196 #9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318 #10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356 #11 0x55f7e70be09b in run_test tests/builtin-test.c:410 #12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This fix is for a failure that occurred in the DWARF unwind perf test. Stack unwinders may probe memory when looking for frames. Memory sanitizer will poison and track uninitialized memory on the stack, and on the heap if the value is copied to the heap. This can lead to false memory sanitizer failures for the use of an uninitialized value. Avoid this problem by removing the poison on the copied stack. The full msan failure with track origins looks like: ==2168==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22 #1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13 #2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #24 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10 #1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13 #2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18 #3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #25 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3 #1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2 #2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9 #3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6 #4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #17 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events' #0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445 SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: clang-built-linux@googlegroups.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandeep Dasgupta <sdasgup@google.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201113182053.754625-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should release the maps at the end. $ perf test -v 71 71: Convert perf time to TSC : --- start --- test child forked, pid 178744 mmap size 528384B 1st event perf time 59207256505278 tsc 13187166645142 rdtsc time 59207256542151 tsc 13187166723020 2nd event perf time 59207256543749 tsc 13187166726393 ================================================================= ==178744==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73 #6 0x55b6209828fb in run_test tests/builtin-test.c:428 #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458 #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679 #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825 #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Convert perf time to TSC: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I got a segfault when using -r option with event groups. The option makes it run the workload multiple times and it will reuse the evlist and evsel for each run. While most of resources are allocated and freed properly, the id hash in the evlist was not and it resulted in the bug. You can see it with the address sanitizer like below: $ perf stat -r 100 -e '{cycles,instructions}' true ================================================================= ==693052==ERROR: AddressSanitizer: heap-use-after-free on address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8 WRITE of size 8 at 0x6080000003d0 thread T0 #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644 #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237 #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244 #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285 #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765 #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782 #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895 #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014 #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446 #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308 #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9) Actually the nodes in the hash table are struct perf_stream_id and they were freed in the previous run. Fix it by resetting the hash. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When the kernel mapping was moved the last 2GB of the address space, (__va(PFN_PHYS(max_low_pfn))) is much smaller than the .data section start address, the last set_memory_nx() in protect_kernel_text_data() will fail, thus the .data section is still mapped as W+X. This results in below W+X mapping waring at boot. Fix it by passing the correct .data section page num to the set_memory_nx(). [ 0.396516] ------------[ cut here ]------------ [ 0.396889] riscv/mm: Found insecure W+X mapping at address (____ptrval____)/0xffffffff80c00000 [ 0.398347] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/ptdump.c:258 note_page+0x244/0x24a [ 0.398964] Modules linked in: [ 0.399459] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1+ #14 [ 0.400003] Hardware name: riscv-virtio,qemu (DT) [ 0.400591] epc : note_page+0x244/0x24a [ 0.401368] ra : note_page+0x244/0x24a [ 0.401772] epc : ffffffff80007c86 ra : ffffffff80007c86 sp : ffffffe000e7bc30 [ 0.402304] gp : ffffffff80caae88 tp : ffffffe000e70000 t0 : ffffffff80cb80cf [ 0.402800] t1 : ffffffff80cb80c0 t2 : 0000000000000000 s0 : ffffffe000e7bc80 [ 0.403310] s1 : ffffffe000e7bde8 a0 : 0000000000000053 a1 : ffffffff80c83ff0 [ 0.403805] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 6c7e7a5137233100 [ 0.404298] a5 : 6c7e7a5137233100 a6 : 0000000000000030 a7 : ffffffffffffffff [ 0.404849] s2 : ffffffff80e00000 s3 : 0000000040000000 s4 : 0000000000000000 [ 0.405393] s5 : 0000000000000000 s6 : 0000000000000003 s7 : ffffffe000e7bd48 [ 0.405935] s8 : ffffffff81000000 s9 : ffffffffc0000000 s10: ffffffe000e7bd48 [ 0.406476] s11: 0000000000001000 t3 : 0000000000000072 t4 : ffffffffffffffff [ 0.407016] t5 : 0000000000000002 t6 : ffffffe000e7b978 [ 0.407435] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.408052] Call Trace: [ 0.408343] [<ffffffff80007c86>] note_page+0x244/0x24a [ 0.408855] [<ffffffff8010c5a6>] ptdump_hole+0x14/0x1e [ 0.409263] [<ffffffff800f65c6>] walk_pgd_range+0x2a0/0x376 [ 0.409690] [<ffffffff800f6828>] walk_page_range_novma+0x4e/0x6e [ 0.410146] [<ffffffff8010c5f8>] ptdump_walk_pgd+0x48/0x78 [ 0.410570] [<ffffffff80007d66>] ptdump_check_wx+0xb4/0xf8 [ 0.410990] [<ffffffff80006738>] mark_rodata_ro+0x26/0x2e [ 0.411407] [<ffffffff8031961e>] kernel_init+0x44/0x108 [ 0.411814] [<ffffffff80002312>] ret_from_exception+0x0/0xc [ 0.412309] ---[ end trace 7ec3459f2547ea83 ]--- [ 0.413141] Checked W+X mappings: failed, 512 W+X pages found Fixes: 2bfc6cd ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

hyuan3 closed this as completed Nov 12, 2018

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Coffee Lake support #14

Coffee Lake support #14

vmbuilder00x0 commented Jan 23, 2018

TerrenceXu commented Feb 6, 2018 via email

ghost commented Mar 3, 2018 •

edited by ghost

Loading

TerrenceXu commented Mar 5, 2018 via email

zerotri commented Mar 5, 2018

TerrenceXu commented Mar 8, 2018 via email

chp-io commented Aug 4, 2018 •

edited

Loading

TerrenceXu commented Aug 6, 2018

Enverex commented Aug 8, 2018

zerotri commented Oct 2, 2018

TerrenceXu commented Oct 16, 2018

CuriousTommy commented Oct 17, 2018

polarathene commented Oct 20, 2018

TerrenceXu commented Oct 23, 2018

CuriousTommy commented Oct 23, 2018

vmbuilder00x0 commented Oct 23, 2018

hyuan3 commented Oct 23, 2018

vmbuilder00x0 commented Oct 23, 2018

slis commented Nov 2, 2018

kbrons commented Nov 3, 2018

ryandward commented Nov 11, 2018

hyuan3 commented Nov 12, 2018

TerrenceXu commented Jul 22, 2019

renne commented Jul 22, 2019

TerrenceXu commented Jul 23, 2019

renne commented Jul 23, 2019

TerrenceXu commented Jul 24, 2019

woulf commented Jun 15, 2020

Coffee Lake support #14

Coffee Lake support #14

Comments

vmbuilder00x0 commented Jan 23, 2018

TerrenceXu commented Feb 6, 2018 via email

ghost commented Mar 3, 2018 • edited by ghost Loading

TerrenceXu commented Mar 5, 2018 via email

zerotri commented Mar 5, 2018

TerrenceXu commented Mar 8, 2018 via email

chp-io commented Aug 4, 2018 • edited Loading

TerrenceXu commented Aug 6, 2018

Enverex commented Aug 8, 2018

zerotri commented Oct 2, 2018

TerrenceXu commented Oct 16, 2018

CuriousTommy commented Oct 17, 2018

polarathene commented Oct 20, 2018

TerrenceXu commented Oct 23, 2018

CuriousTommy commented Oct 23, 2018

vmbuilder00x0 commented Oct 23, 2018

hyuan3 commented Oct 23, 2018

vmbuilder00x0 commented Oct 23, 2018

slis commented Nov 2, 2018

kbrons commented Nov 3, 2018

ryandward commented Nov 11, 2018

hyuan3 commented Nov 12, 2018

TerrenceXu commented Jul 22, 2019

renne commented Jul 22, 2019

TerrenceXu commented Jul 23, 2019

renne commented Jul 23, 2019

TerrenceXu commented Jul 24, 2019

woulf commented Jun 15, 2020

ghost commented Mar 3, 2018 •

edited by ghost

Loading

chp-io commented Aug 4, 2018 •

edited

Loading