Dutlink v2 (untested prototype)

This is an untested release which includes the following improvements:

• On-board USB3 hub enables single USB connection to the test host
• 3 USB3 ports, enabling: video capture devices, video injectors, CAN bus adapters, programmers, etc..
• Integrated FT2232 chip for additional serial and JTAG ports
• Better power routing, enabling ATX 4-pin molex power input

Updated form factor 1.1.0

Full list of changes:

• Added EMC filtering on power lines
• SPI and I2C connections for extensibility
• The DUT Storage connector has been replaced with a more robust one.
• Improved USB3.0 line impedance and length control.
• Moved the LED connectors closer to the front of the PCB.
• The USB Storage remains inside of the case.
• Doubled capacitors for DUT and USB power.
• USBC twisting bug fixed: control USBC now should work on both positions.
  
  

You can order prototypes to be made by using the following link : https://www.seeedstudio.com/Jumpstarter-DUTLink-board-1-1-0-g-1405971

Initial release, tested propotype.

This version of the hardware is fully functional.

USB 3.0 achieves Gen2 to the host but not to some devices, where it's limited to Gen1 (5Gbps) it's recommended to use a Gen1 max storage device.

Or propotypes have been manufactured in seeedstudio fusion an can be re-ordered from here:

https://www.seeedstudio.com/Jumpstarter-DUTLink-board-g-1395074

Or you can order your own anywhere else.