IR Blaster for Flipper Zero This application allows you to guess the IR remote control codes for devices. It is useful in the absence of the original remote control.
- use the left/right key to select the protocol
- use the up/down key to select what you want to change: protocol, address, command
- use the left/right key to change the address/command
- press the middle key Flipper Zero will send a command via the IR transmitter, after each sending the command increases by 1 up to the maximum for a given protocol, then the address increases by 1 and the commands start from 1.
- to stop press back, then you can change the protocol/address/command.