deps: update openssl to quictls/openssl 3.0.0+quic

BUILDING.md

@@ -764,11 +764,48 @@ as `deps/icu` (You'll have: `deps/icu/source/...`)
 
 ## Building Node.js with FIPS-compliant OpenSSL
 
-The current version of Node.js does not support FIPS when statically linking
-(the default) with OpenSSL 1.1.1 but for dynamically linking it is possible
-to enable FIPS using the configuration flag `--openssl-is-fips`.
+The current version of Node.js supports FIPS when statically and
+dynamically linking with OpenSSL 3.0.0 by using the configuration flag
+`--openssl-is-fips`.
 
-### Configuring and building quictls/openssl for FIPS
+### FIPS support when statically linking OpenSSL
+
+FIPS can be supported by specifying the configuration flag `--openssl-is-fips`:
+```console
+$ ./configure --openssl-is-fips
+$ make -j8
+```
+
+The above command will build and install the FIPS module into the out directory.
+This includes building fips.so, running the `installfips` command that generates
+the FIPS configuration file (fipsmodule.cnf), copying and updating openssl.cnf
+to include the correct path to fipsmodule.cnf and finally uncomment the fips
+section.
+
+We can then run node specifying `--enable-fips`:
+```console
+$ ./node --enable-fips  -p 'crypto.getFips()'
+1
+```
+The above will use the Node.js default locations for OpenSSL 3.0:
+```console
+$ ./out/Release/openssl-cli version -m -d
+OPENSSLDIR: "/nodejs/openssl/out/Release/obj.target/deps/openssl"
+MODULESDIR: "/nodejs/openssl/out/Release/obj.target/deps/openssl/lib/openssl-modules"
+```
+The OpenSSL configuration files will be found in `OPENSSLDIR` directory above:
+```console
+$ ls -w 1 out/Release/obj.target/deps/openssl/*.cnf
+out/Release/obj.target/deps/openssl/fipsmodule.cnf
+out/Release/obj.target/deps/openssl/openssl.cnf
+```
+And the FIPS module will be located in the `MODULESDIR` directory:
+```console
+$ ls out/Release/obj.target/deps/openssl/lib/openssl-modules/
+fips.so
+```
+
+### FIPS support when dynamically linking OpenSSL
 
 For quictls/openssl 3.0 it is possible to enable FIPS when dynamically linking.
 If you want to build Node.js using openssl-3.0.0+quic, you can follow these
@@ -811,7 +848,7 @@ find the `fipsmodule.cnf` file - let's add the following to the end of the
 **alter openssl.cnf**
 
 ```text
-.include fipsmodule.cnf
+.include /absolute/path/to/fipsmodule.cnf
 
 # List of providers to load
 [provider_sect]

Makefile

@@ -188,7 +188,7 @@ testclean:
 .PHONY: distclean
 distclean:
 	$(RM) -r out
-	$(RM) config.gypi icu_config.gypi config_fips.gypi
+	$(RM) config.gypi icu_config.gypi
 	$(RM) config.mk
 	$(RM) -r $(NODE_EXE) $(NODE_G_EXE)
 	$(RM) -r node_modules

common.gypi

@@ -28,7 +28,7 @@
     'clang%': 0,
     'error_on_warn%': 'false',
 
-    'openssl_fips%': '',
+    'openssl_product': '<(STATIC_LIB_PREFIX)openssl<(STATIC_LIB_SUFFIX)',
     'openssl_no_asm%': 0,
 
     # Don't use ICU data file (icudtl.dat) from V8, we use our own.
@@ -98,11 +98,6 @@
         'obj_dir%': '<(PRODUCT_DIR)/obj.target',
         'v8_base': '<(PRODUCT_DIR)/obj.target/tools/v8_gypfiles/libv8_snapshot.a',
       }],
-      ['openssl_fips != ""', {
-        'openssl_product': '<(STATIC_LIB_PREFIX)openssl<(STATIC_LIB_SUFFIX)',
-      }, {
-        'openssl_product': '<(STATIC_LIB_PREFIX)openssl<(STATIC_LIB_SUFFIX)',
-      }],
       ['OS=="mac"', {
         'clang%': 1,
         'obj_dir%': '<(PRODUCT_DIR)/obj.target',

configure.py

@@ -195,11 +195,6 @@
     default=None,
     help="Do not build optimized assembly for OpenSSL")
 
-parser.add_argument('--openssl-fips',
-    action='store',
-    dest='openssl_fips',
-    help='Build OpenSSL using FIPS canister .o file in supplied folder')
-
 parser.add_argument('--openssl-is-fips',
     action='store_true',
     dest='openssl_is_fips',
@@ -1414,8 +1409,7 @@ def configure_openssl(o):
   variables['node_shared_ngtcp2'] = b(options.shared_ngtcp2)
   variables['node_shared_nghttp3'] = b(options.shared_nghttp3)
   variables['openssl_is_fips'] = b(options.openssl_is_fips)
-  variables['openssl_fips'] = ''
-  variables['openssl_quic'] = b(True)
+  variables['node_fipsinstall'] = b(False)
 
   if options.openssl_no_asm:
     variables['openssl_no_asm'] = 1
@@ -1427,8 +1421,8 @@ def without_ssl_error(option):
       without_ssl_error('--shared-openssl')
     if options.openssl_no_asm:
       without_ssl_error('--openssl-no-asm')
-    if options.openssl_fips:
-      without_ssl_error('--openssl-fips')
+    if options.openssl_is_fips:
+      without_ssl_error('--openssl-is-fips')
     if options.openssl_default_cipher_list:
       without_ssl_error('--openssl-default-cipher-list')
     return
@@ -1468,17 +1462,18 @@ def without_ssl_error(option):
   if options.openssl_no_asm and options.shared_openssl:
     error('--openssl-no-asm is incompatible with --shared-openssl')
 
-  if options.openssl_fips or options.openssl_fips == '':
-     error('FIPS is not supported in this version of Node.js')
-
   if options.openssl_is_fips and not options.shared_openssl:
-    error('--openssl-is-fips is only available with --shared-openssl')
-
-  if options.openssl_is_fips:
     o['defines'] += ['OPENSSL_FIPS']
+    variables['node_fipsinstall'] = b(True)
 
   if options.shared_openssl:
-    variables['openssl_quic'] = b(getsharedopensslhasquic.get_has_quic(options.__dict__['shared_openssl_includes']))
+    has_quic = getsharedopensslhasquic.get_has_quic(options.__dict__['shared_openssl_includes'])
+  else:
+    has_quic = getsharedopensslhasquic.get_has_quic('deps/openssl/openssl/include')
+
+  variables['openssl_quic'] = b(has_quic)
+  if has_quic:
+    o['defines'] += ['NODE_OPENSSL_HAS_QUIC']
 
   configure_library('openssl', o)
 
@@ -1927,15 +1922,6 @@ def make_bin_override():
 del output['variables']
 variables['is_debug'] = B(options.debug)
 
-# make_global_settings for special FIPS linking
-# should not be used to compile modules in node-gyp
-config_fips = { 'make_global_settings' : [] }
-if 'make_fips_settings' in output:
-  config_fips['make_global_settings'] = output['make_fips_settings']
-  del output['make_fips_settings']
-  write('config_fips.gypi', do_not_edit +
-        pprint.pformat(config_fips, indent=2) + '\n')
-
 # make_global_settings should be a root level element too
 if 'make_global_settings' in output:
   make_global_settings = output['make_global_settings']

deps/openssl/.gitignore

@@ -1 +1,3 @@
 openssl/fuzz/corpora
+openssl/makefile.in
+openssl/Makefile.in

deps/openssl/README.md

@@ -1,7 +1,7 @@
-This has a new binding scheme in building OpenSSL-1.1.0 library with
-Node.js. OpenSSL-1.1.0 uses a new build system with `Perl` for various
+This has a new binding scheme in building OpenSSL-3.0.0 library with
+Node.js. OpenSSL-3.0.0 uses a new build system with `Perl` for various
 supported platforms. See `openssl/Configurations/README` and
-`openssl/Configurations/README.design` in the OpenSSL source for
+`openssl/Configurations/README-design.md` in the OpenSSL source for
 details.
 
 In order to build OpenSSL library without `Perl` in the build of Node.js
@@ -13,7 +13,7 @@ and header files ) are pre-generated and stored into the
 
   Makefile has supported platform list and generates and copies
   platform dependent files (e.g. asm files) into arch directory with
-  `generate_gypi.pl`.  Platform dependent gypi files also created
+  `generate_gypi.pl`.  Platform dependent gypi files are also created
   obtaining build information from `configdata.pm` that is generated
   with `Configure` in the OpenSSL build system.
 
@@ -36,7 +36,8 @@ and header files ) are pre-generated and stored into the
   `bn_conf.h`, `dso_conf.h` and `opensslconf.h` are platform dependent
   in the OpenSSL sources. They are replaced with `config/*.h.tmpl`
   files to include the file in the `../../../config/` and referred to
-  each arch file that depends on asm and no-asm option.
+  each arch file that depends on asm and no-asm option. These headers are
+  generated by the make target `generate_headers`.
 
 ### Supported architectures for use of ASM
 

deps/openssl/config/Makefile

@@ -9,7 +9,7 @@ endif
 PERL    = perl
 
 # Supported architecture list
-ASM_ARCHS = aix-gcc aix64-gcc BSD-x86 BSD-x86_64 \
+ASM_ARCHS = aix-gcc aix64-gcc-as BSD-x86 BSD-x86_64 \
 darwin64-x86_64-cc darwin-i386-cc darwin64-arm64-cc linux-aarch64 \
 linux-armv4 linux-elf linux-x32 linux-x86_64 linux-ppc \
 linux-ppc64 linux-ppc64le linux32-s390x linux64-s390x linux64-mips64\
@@ -25,7 +25,7 @@ CONFIGURE = ./Configure
 # no-shared: openssl-cli needs static link
 # no-afalgeng: old Linux kernel < 4.0 does not support it
 # enable-ssl-trace: cause the optional SSL_trace API to be built
-COPTS =  no-comp no-shared no-afalgeng enable-ssl-trace
+COPTS =  no-comp no-shared no-afalgeng enable-ssl-trace enable-fips
 
 # disable platform check in Configure
 NO_WARN_ENV = CONFIGURE_CHECKER_WARN=1
@@ -35,41 +35,41 @@ GENERATE = ./generate_gypi.pl
 OPSSL_SRC = ../openssl
 
 # Header files generated with Configure
-CFG = opensslconf.h
-SRC_CFG = $(OPSSL_SRC)/include/openssl/$(CFG)
-INT_CFGS = bn_conf.h dso_conf.h
+#INT_CFGS = bn_conf.h dso_conf.h
 INT_CFG_DIR = $(OPSSL_SRC)/include/crypto
+GEN_HEADERS = asn1 asn1t bio cmp cms configuration conf crmf crypto ct err    \
+              ess fipskey lhash ocsp opensslv pkcs12 pkcs7 safestack srp ssl  \
+	      ui x509 x509v3 x509_vfy conf
 
-PHONY = all clean replace
+CRYPTO_GEN_HEADERS = bn_conf dso_conf
+
+PHONY = all clean replace generate_headers
 .PHONY: $(PHONY)
 
-all: $(ASM_ARCHS) $(NO_ASM_ARCHS) replace
+#all: $(ASM_ARCHS) $(NO_ASM_ARCHS) generate_headers replace
+all: $(ASM_ARCHS) $(NO_ASM_ARCHS) generate_headers
 
 # Configure and generate openssl asm files for each archs
 $(ASM_ARCHS):
 	cd $(OPSSL_SRC); $(NO_WARN_ENV) CC=$(CC) $(PERL) $(CONFIGURE) $(COPTS) $@;
-	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) asm $@
+	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) asm $@ "${GEN_HEADERS}" "${CRYPTO_GEN_HEADERS}"
 # Confgure asm_avx2 and generate upto avx2 support
 	cd $(OPSSL_SRC); $(NO_WARN_ENV) CC=$(FAKE_GCC) $(PERL) $(CONFIGURE) \
 	$(COPTS) $@;
-	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) asm_avx2 $@
+	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) asm_avx2 $@ "${GEN_HEADERS}" "${CRYTO_GEN_HEADERS}"
 # Configure no-asm and generate no-asm sources
 	cd $(OPSSL_SRC); $(NO_WARN_ENV) $(PERL) $(CONFIGURE) $(COPTS) \
 	no-asm $@;
-	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) no-asm $@
+	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) no-asm $@ "${GEN_HEADERS}" "${CRYPTO_GEN_HEADERS}"
 
 $(NO_ASM_ARCHS):
 # Configure no-asm and generate no-asm sources
 	cd $(OPSSL_SRC); $(NO_WARN_ENV) $(PERL) $(CONFIGURE) $(COPTS) \
 	no-asm $@;
-	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) no-asm $@
-
-# Replace and copy arch dependent headers
-replace:
-	cp ./$(CFG).tmpl $(SRC_CFG)
-	@for c in $(INT_CFGS); do \
-	    cp ./$$c.tmpl $(INT_CFG_DIR)/$$c; \
-	done
+	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) no-asm $@ "${GEN_HEADERS}" "${CRYPTO_GEN_HEADERS}"
+
+generate_headers:
+	@$(PERL) -w -I$(OPSSL_SRC) ./generate_headers.pl "${GEN_HEADERS}" "${CRYPTO_GEN_HEADERS}"
 
 clean:
 	find archs \( -name \*.S -o -name \*.s -o -name \*.asm -o \