Skip to content
This repository has been archived by the owner on Nov 1, 2023. It is now read-only.

Having Problems?

Jump to bottom
Patrick Magauran edited this page Dec 13, 2020 · 1 revision

Here are some things to note if you encounter problems.

  1. The iGPU MUST be at address 00:02.00 in the GUEST OS.
  2. The iGPU may need to be setup as the Boot GPU on the Host System.
  3. HDMI may not work
  4. Connections over USB-C or TB may not work
  5. This driver should not affect what happens once the guest OS loads. If the guest OS cannot create a display output, you may be running in UPT mode instead of legacy mode.
Clone this wiki locally