Skip to content

tinyfpga/TinyFPGA-B-Series

Repository files navigation

TinyFPGA B2 Board

The TinyFPGA B2 board is a tiny FPGA board with a low cost per logic element and convenient USB bitstream programming capability. It measures just 18mm x 36mm and is a perfect fit for breadboards.

TinyFPGA BX Repo has Moved

If you are looking for the TinyFPGA BX design files and examples, it is in a seperate repository: TinyFPGA BX GitHub Repo.

Features

The heart of the B-series boards is either a ICE40LP4K or ICE40LP8K FPGA from Lattice. For full details on the ICE40 series of FPGAs you can read the ICE40 Family Handbook.

FPGA Feature Summary

TinyFPGA B1 TinyFPGA B2
FPGA Chip ICE40LP4K ICE40LP8K
Logic Cells 3,520 7,680
Block RAM Bits 80 KBit 128 KBit
Phase Lock Loops 1 1
User IO Pins 23 23

Common Features

  • Small form-factor that is breadboard friendly; plenty of space on either side for connecting jumpers or components.
  • Built-in USB interface for programming new FPGA bitstreams and user data to flash.
  • 4MBit of SPI Flash
    • Bootloader bitstream takes up about 1MBit, user design bitstream will take another 1MBit, the rest is free to use for other purposes.
  • 3.3v and 1.2v Regulators
    • 3.3v LDO regulator can supply up to 300ma of current. This leaves some headroom for user peripherals.
    • 1.2v LDO regulator can supply up to 150ma of current. More headroom for user peripherals.
  • Ultra Low-Power 16MHz MEMs Oscillator
    • Consumes 1.3ma power when active.
    • 50ppm stability

Building your own TinyFPGA B1 or B2 Boards

It is possible to build the TinyFPGA B-Series boards by hand in a home lab. However, it uses tiny 0402 surface mount capacitors and resistors and the ICE40 FPGAs used are in a 81 ball BGA package with 0.4mm pitch between the balls. It is a challenging undertaking and will most likely result in some bad assembled boards along with the good. I have used the following with success to hand assemble the prototype boards:

  • Parts for the TinyFPGA B1 or B2
  • Lead-Free Solder Paste
  • Stainless Steel Solder Paste Squeegee
  • TinyFPGA B-Series Solder Paste Stencil
    • You'll need to generate the gerber files and upload the solder paste layer. You will want the stainless steel stencil, I do not believe the polymide will work with the fine pitch BGA package.
  • TinyFPGA B-Series PCBs
    • These boards require tighter tolerances than OSH Park advertises. However, I have gotten lucky with some boards from OSH Park for this project and they have worked well.
  • Precision Tweezers for placing parts on the board
  • Some sort of magnifying tool for placing parts (magnifying glasses, magnifying lamp, microscope)
  • Reflow Oven
    • I was using an electric griddle to reflow the A-series boards and it worked well enough. However I didn't bother trying that with the micro BGA package on the B-series boards and I got a reflow oven kit. This particular kit is excellent.
  • Lattice FPGA Programmer or Arduino board
    • You will need this to load the bootloader onto the SPI Flash. Once the bootloader is installed you can use the Python-based programmer application to program the board over USB.
    • Look in the programmer_arduino folder to load the bootloader onto the SPI Flash using an Arduino.

Buy TinyFPGA B1 or B2 Boards

If you don't want to go through the hassle of ordering parts, tools, and supplies and assembling the boards yourself you can order professionally assembled and tested boards from Tindie or the TinyFPGA Store. These boards are not hobbyist-made, they are fabricated and assembled in a professional PCB fab that manufactures and assembles many other consumer, industrial and military electronics. They go through an automated testing and programming process to ensure the board is healthy and ready to program over USB.

Project Directory Structure

board

This contains a KiCad project with the schematic and layout of the B-series boards. The board is designed with 4/4mil track size/spacing and 0.2mm hole size. BOM lists for B1 and B2 boards are available here as well.

bootloader

FPGA boards with USB bitstream programming capability typically use an expensive USB interface chip to provide this functionality. The TinyFPGA B-series implement the USB bitstream programming capability within the FPGA itself. This directory contains the verilog code that implements this bootloader. The code is organized as an iCEcube2 project. The bootloader itself works in the same way an Arduino bootloader works. It is the first design to boot on the FPGA, if it is connected to a USB host it waits for a new bitstream to be programmed to the SPI flash, then reboots the FPGA to load the user design from flash. If the board is not connected to a USB host or if there is no programmer application running on the host then the bootloader will quickly timeout and load the user design. The bootloader does not consume any FPGA resources while the user design is loaded.

programmer

The bootloader uses a simple protocol over a generic USB serial interface. This directory contains a Python module for interfacing with the bootloader as well as a friendly Python GUI application for selecting and programming bitstreams.

template

This is a template iCEcube2 project for developing your own designs to program onto the board. It takes care of pin and clock constraints. Just edit the TinyFPGA_B.v file to add your designs module(s).

Project Log

For more information on the development and production of the B-Series please read and follow the TinyFPGA B-Series Project Page at hackaday.io.

License

The TinyFPGA B-Series project is an open source project licensed under GPLv3. Please see the included LICENSE file for details. If you do wish to distribute boards derived from this open source hardware project then you must also release the source files for the boards under GPLv3. You are free to do this, but please improve upon the original design and provide a tangible benefit for users of the board.

About

Open source design files for the TinyFPGA B-Series boards.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •