-
Notifications
You must be signed in to change notification settings - Fork 1.9k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Support problems with models with hole in the walls. #555
Comments
Try increasing the 'XY separation'. In Cura you have set it to 2mm. When I try setting it to 2mm it works for me with 'Don't support bridges' unchecked. |
Thank you for the tip ! :) |
expanded to a grid (the old way) vs. snug (like the upstream Slic3r, Cura or Ideamaker). Snug supports suffered from the degeneracies when merging overhang islands over a large number of layers when projecting the support towers down. We borrowed the idea & a bit of code from Cura by simplifying the support polygons by closing the concave cracks, see the smooth_outward() function and the MutablePolygon class. Fixes Support problems with models with hole in the walls. #555 Fixes Support in the Air #740 Fixes [Bug] Supports generated beyond bed edges (X<0 and X>250) and where none are needed. #902 Fixes Unable to remove support material/can't change support "inflation distance" #2708 Fixes FR: support inflation and support conform to boundary #4783 Fixes Support blocker not working on this model #1346 Fixes Unnecessary support material #1993 Fixes support blocker enforcer issue #6240
Fixed with af9c7c9
|
Version
Slic3r-1.37.1-prusa3d-linux64-full-201709141215
Operating system type + version
$ uname -a
Linux debian 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19) x86_64 GNU/Linux
$ cat /etc/debian_version
9.2
Behavior
Expected Results
Support should be generated properly.
Actual Results
Support is not generated properly.
STL/Config (.ZIP) where problem occurs
Slic3rSupportError.zip
The text was updated successfully, but these errors were encountered: